www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2 3  All

Author Topic: S&S 635 cams in 124HC  (Read 10994 times)

0 Members and 1 Guest are viewing this topic.

BigLew

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2794
S&S 635 cams in 124HC
« on: June 05, 2015, 02:55:01 PM »
Hey guys I have a 124 HC (640 cams) in a 09 road glide with a procharger. The 640 cams are not a good match for the blower and the static pressure. The cams blow a lot of the boost off. I'm wondering if anyone has taken the new 635s that come with the new 143 and tried them in a 124HC? I'm thinking they might make better mid range power. Anyone have any experience?

BigLew
Logged

JCZ

  • Global Moderator
  • 10K CVO Member
  • *****
  • Offline Offline
  • Posts: 23528
    • AZ


    • CVO1: 04 SEEG...sold
    • CVO2: 10 SESG...sold
    • CVO3: 13 FLHTCSE 8
Re: S&S 635 cams in 124HC
« Reply #1 on: June 05, 2015, 03:02:48 PM »
You're going to ride a rocket with a bad back?

OK, I would too!  :huepfenlol2:
Logged
Never trade the thrills of living for the security of existence.  Remember...it's the journey, not the destination!

West Coast GTG   
Reno, NV (04), Reno, NV (05),  Cripple Creek, CO (06)  Hood River, OR (09), Lake Tahoe, CA (11) Carmel, CA (14), Ouray CO (15) Fortuna, Ca. (16)

Fullsac Performance

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1753
  • Never ride with a Halfsac! Insist on Fullsac Perf!
    • AZ

    • Fullsac Performance
Re: S&S 635 cams in 124HC
« Reply #2 on: June 05, 2015, 03:08:38 PM »
Quote from: BigLew on June 05, 2015, 02:55:01 PM
Hey guys I have a 124 HC (640 cams) in a 09 road glide with a procharger. The 640 cams are not a good match for the blower and the static pressure. The cams blow a lot of the boost off. I'm wondering if anyone has taken the new 635s that come with the new 143 and tried them in a 124HC? I'm thinking they might make better mid range power. Anyone have any experience?

BigLew

You may want to talk to TR at Tman. He has the baddest Pro Charger build on the planet. 360 HP to the ground.
Its the real deal.

SG
Logged
Steve@fullsac.com  www.fullsac.com
Never argue with idiots. They will beat you with experience.

BigLew

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2794
Re: S&S 635 cams in 124HC
« Reply #3 on: June 05, 2015, 03:49:13 PM »
Quote from: JCZ on June 05, 2015, 03:02:48 PM
You're going to ride a rocket with a bad back?

OK, I would too!  :huepfenlol2:
Just put -putting along!
Logged

BigLew

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2794
Re: S&S 635 cams in 124HC
« Reply #4 on: June 05, 2015, 03:56:38 PM »
Quote from: Fullsac Performance on June 05, 2015, 03:08:38 PM
You may want to talk to TR at Tman. He has the baddest Pro Charger build on the planet. 360 HP to the ground.
Its the real deal.

SG
Steve last time I talked to him at his shop about all he wanted to talk about is building something that would make a bunch of HP at redline. But I don't ride at redline. So I would like something to run hard from 3000 to 5000 instead of 4500 to 6000 and more usable torque. This cam is late and bleeds off a lot of boost. it makes pretty good HP (202) and ok TQ (178) but starts really late.

BigLew
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3119
Re: S&S 635 cams in 124HC
« Reply #5 on: June 07, 2015, 12:09:11 PM »
Consider talking to Dan Thayer who also has similar experience.
Logged

BigLew

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2794
Re: S&S 635 cams in 124HC
« Reply #6 on: June 08, 2015, 09:51:41 AM »
Don't know Dan, where can I find him?

BigLew
Logged

JCZ

  • Global Moderator
  • 10K CVO Member
  • *****
  • Offline Offline
  • Posts: 23528
    • AZ


    • CVO1: 04 SEEG...sold
    • CVO2: 10 SESG...sold
    • CVO3: 13 FLHTCSE 8
Re: S&S 635 cams in 124HC
« Reply #7 on: June 08, 2015, 10:06:18 AM »
He's an MMA flyweight fighter from Maine.  Doesn't look like he's had any professional fights yet  :nixweiss:   http://www.sherdog.com/fighter/Dan-Thayer-158819
Logged
Never trade the thrills of living for the security of existence.  Remember...it's the journey, not the destination!

West Coast GTG   
Reno, NV (04), Reno, NV (05),  Cripple Creek, CO (06)  Hood River, OR (09), Lake Tahoe, CA (11) Carmel, CA (14), Ouray CO (15) Fortuna, Ca. (16)

BigLew

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2794
Re: S&S 635 cams in 124HC
« Reply #8 on: June 08, 2015, 10:31:22 AM »
So JC are you saying he has a 124 with procharger?

BigLew
Logged

FlaHeatWave

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2208

    • CVO1: '01 FXDWG2 RED 103 6sp
    • CVO2: '05 FLHTCSE2 CHERRY
    • CVO3: '09 FLTRSE3 YELLOW 117/DD7
Re: S&S 635 cams in 124HC
« Reply #9 on: June 08, 2015, 04:18:44 PM »
Quote from: BigLew on June 08, 2015, 09:51:41 AM
Don't know Dan, where can I find him?

BigLew

Dan Thayer designs and builds Oil Pumps & Cam Plates for TC motors. T-Man carries some of his products.

You might want to contact Frank at Drago's, he has a lot of experience with Forced Induction HDs.
http://dragosbikeworks.com/

Have you asked S&S what Cams they recommend for you?
« Last Edit: June 08, 2015, 04:22:42 PM by FlaHeatWave »
Logged
"I've read dozens of books about heros and crooks, and learned much from both of their styles"

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3119
Re: S&S 635 cams in 124HC
« Reply #10 on: June 08, 2015, 04:26:33 PM »
Dan has helped campaign bikes at Bonneville which were boosted. And has helped design fuel systems. Nice guy knowledgeable and nothing to sell you.
Logged

BigLew

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2794
Re: S&S 635 cams in 124HC
« Reply #11 on: June 08, 2015, 04:30:06 PM »
Guess I need to find out how to contact him.

BigLew
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3119
Re: S&S 635 cams in 124HC
« Reply #12 on: June 08, 2015, 08:25:54 PM »
THAYERS SALES & SERVICE
2078 CLEVELAND RD
CORFU, NY 14036
Phone:  (585) 762-4705
Logged

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
Re: S&S 635 cams in 124HC
« Reply #13 on: June 09, 2015, 07:21:20 AM »
S&S copied/stole his pump. >:(
Scott
« Last Edit: June 10, 2015, 06:00:01 AM by HILLSIDECYCLE.COM »
Logged

BigLew

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2794
Re: S&S 635 cams in 124HC
« Reply #14 on: June 09, 2015, 08:40:19 AM »
Well I'll give Dan a call. Maybe he can shed some light on the subject!

BigLew
Logged
Pages: [1] 2 3  All
« previous next »
 

Page created in 0.144 seconds with 21 queries.