Fired up and ran on down the road like it does every other day, made a quick stop let it site for about 10 mins come out, it fires off no problem but i hear it hesitate a tad as i start to engage.. that weird, i check the enrichener to make sure its not out and its not, then 20 feet letter it starts stumbling very bad then dies... I was able to get it started briefly at wot for just a few seconds and since then nothing, it just cranks and wont fire over...
I put on new plugs hoping that was the issue, didn't fix it.. it looks like i'm gettin spark but my buddy thinks the spark might be a little weak..
I've pulled the coil and check primary and secondary and they are fine.. the books calls for checking the cam position sensor and i cant seem to get 12 volts off it (but for the life of me the book seems to indicate checking the connector from the actual cam sensor side, how in the world can it have 12 volts coming off there if i've got the harness apart), So i checked both side and am not get twelve volts.. it then says to check all the connections (pos and neg) for the ignition which i did, still no joy..
We've verified it is getting gas by a visual through the carb..
Can someone throw some ideals at me to get this fixed? I'm going to keep reading through the book..