www.CVOHARLEY.com

CVO Technical => Electronic Toys and Gadgets => Topic started by: ad2 on January 16, 2010, 02:12:19 PM

Title: 660 Wires
Post by: ad2 on January 16, 2010, 02:12:19 PM

Any suggestions on where you ran all the wires for the 660? Not the hot wire, that one will be easy, but where are you putting the other connections? I would have been much happier with just a simple hot wire - I don't need the other ones.

Title: Re: 660 Wires
Post by: ad2 on January 17, 2010, 07:27:17 AM

Guess I should be clear, I'm talking about the Garmin 660 GPS.

Title: Re: 660 Wires
Post by: Gone Fishin' on January 17, 2010, 12:40:03 PM

What other wires besides the 12V would you need?

Ride safely,
Louis

Title: Re: 660 Wires
Post by: hdbrad03 on January 17, 2010, 02:03:12 PM

12volt + & - connect to intenational marker light wires
mini stereo out to plug into aux in on radio
mono plug for wired microphone
connector for traffic fm receiver

 :bananarock: :bananarock:
      Brad

Title: Re: 660 Wires
Post by: rogerkmac on January 17, 2010, 06:58:45 PM

I have a 660 and ran all my wires into the fairing and then ran the power cable back out and added a cigarette power adapter to the power cord.  This will allow me access to change fuse, if necessary, without having to go back into the fairing.