Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Grounding the Frame and Motor  (Read 6873 times)

0 Members and 1 Guest are viewing this topic.

ltank

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1214
    • LA

    • CVO1: 2000 FXR4 S&S V111, CustomS.S. 2-1 exhaust, Primo-Rivera OD 6 speed, 49mm Custom Front End Ohlins 30mm Fork cartridges , Hyperpro Shocks, Barnett Scorpian Clutch
    • CVO2: 1983 88" Shovelhead Won the World of Wheels 1985 Sept 85 Issue of Hot Bike Mag
    • CVO3: 1989 FXRS, 1990 Custom 100" Shovelhead/ EVO
Grounding the Frame and Motor
« on: October 25, 2020, 06:14:59 PM »

My 98 Road King developed a Ground problem. Things had been fine for 65k miles until now. The Schematic shows the Neg. Battery Cable goes to the
Right fender grounding stud. Previous owner had the battery gnd to inner Primary. There is .1 ohms from battery gnd to motor. But there's 7 ohms between the
Battery gnd and frame.
   Putting the battery gnd to the right fender stud has a low resistance but now I have 7 ohms between battery ground and motor and is playing Hell with the starter.  Isn't there supposed to be grounding strap between the motor and Frame to solve this???
Thanks guys
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50556
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Grounding the Frame and Motor
« Reply #1 on: October 25, 2020, 07:17:38 PM »

The big negative cable should go down to a starter bolt.  Bolt will go through the starter housing in to the primary.
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50556
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Grounding the Frame and Motor
« Reply #2 on: October 25, 2020, 07:25:49 PM »

^^  At least that's my recollection ^^
Logged

ltank

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1214
    • LA

    • CVO1: 2000 FXR4 S&S V111, CustomS.S. 2-1 exhaust, Primo-Rivera OD 6 speed, 49mm Custom Front End Ohlins 30mm Fork cartridges , Hyperpro Shocks, Barnett Scorpian Clutch
    • CVO2: 1983 88" Shovelhead Won the World of Wheels 1985 Sept 85 Issue of Hot Bike Mag
    • CVO3: 1989 FXRS, 1990 Custom 100" Shovelhead/ EVO
Re: Grounding the Frame and Motor
« Reply #3 on: October 25, 2020, 08:45:31 PM »

When I removed Battery and checked the grounds, I found that the Battery Gnd was going to the Motor and Fender gnd wasn't connected causing crazy readings. Now the Battery and Frame is tied to the Battery Gnd. All readings are good.
Logged
 

Page created in 0.226 seconds with 24 queries.