OK forget whatever I said. Looked at it tonight and took some photos, but I don't think the photo deal is going to happen for me tonight. I do have a junction fitting under the seat and it is strapped to the piece that the driver's back rest sticks into. Second I have an antenna relocation kit and it is held on by the same screws that hold the lay down license plate. If you took the license plate off you could see the screws. OK now when I am using the police look alike antenna, the original antenna wire that came with the bike screws into the relocation bracket. Now we want to use the tour box. OK, detach antenna wire from bottom of bracket and attach it to the antenna junction installed under the seat. Just roll up the extra cord and attach it to the right side of the junction box. Note I said right side as there is a reason. Mount the tour box and my tour box antenna wire comes out the left front bottom of the tour box. I measured mine and it estends 16 inches beyond the tour box which is just about perfect to screw into the right end of the antenna junction box. I have to take off the antenna on the relocation bracket before I put the tour pack on. As stated earlier, I use the short rubber antenna I bought at Radio Shack for the tour box. Well there you go. Sorry I could not figure out the photo deal tonight. I'm going to go fix myself a drink.