www.CVOHARLEY.com

CVO Technical => General CVO discussion => Topic started by: Kcoop on October 15, 2012, 11:08:30 PM

Title: Windshields
Post by: Kcoop on October 15, 2012, 11:08:30 PM
 :cucumber: looking to replace my windshield, but can't decide which one - HD, Klock Worx, Wind, etc.  anybody have any ideas/opinions?
Title: Re: Windshields
Post by: bmcgc on October 15, 2012, 11:38:01 PM
I have four windshields because I do all types of riding year round, 4, 8, 10, and 12.
Title: Re: Windshields
Post by: Kingspoke on October 15, 2012, 11:48:33 PM
I use a 9.5" dark tint "Clearview" and will probably switch over to a 12" clear for the winter months (all two months, in Cali) to just keep the chill off me.  Clearview is a very good shield.  http://www.clearviewshields.com/
Title: Re: Windshields
Post by: SanJuanRon on October 16, 2012, 12:41:12 AM
I have several Clearview windshields and prefer the 8" & 9.5" with recurve (dark grey / smoke).  The 9.5" is better for long distance riding and I can see over the top by an inch or two (I am 6').  SJ Ron
Title: Re: Windshields
Post by: highwayking on October 16, 2012, 07:55:44 AM
I have a 9-inch LRS Ultra in medium tint on mine.  Works as well as the OEM 10-inch on buffeting.  Two years on and no scratches.
Title: Re: Windshields
Post by: paddockdrive on October 16, 2012, 09:17:25 AM
I have a 7" Freedom Shield on mine.  Can't say enough about it.  It took all the buffeting away.  And its a great looking shield.
Title: Re: Windshields
Post by: miker on October 16, 2012, 11:04:36 AM
Freedom shields...the chuck norris of windshields.... :D
Title: Re: Windshields
Post by: CVOThunder on October 16, 2012, 12:49:17 PM
I went with Freedom Shields as well but in a 11" light tint. Should have just gone with the 10" but if I sit up straight then it'd be fine. Backrest would probably take care of that. Otherwise I like it alot. Definately took care of BSR helmet buffeting and looks good to boot. 6'2"/32" inseam
Title: Re: Windshields
Post by: paddockdrive on October 16, 2012, 03:27:22 PM
I'm with you CVOTHUNDER, I should have went with the 6" on mine.  I think the little lip on the shield makes it sit taller than a standard shield.
Title: Re: Windshields
Post by: PMG1 on October 16, 2012, 10:07:26 PM
Freedom Windshield have 2 of them. Awesome :)
Title: Re: Windshields
Post by: 2k on October 18, 2012, 05:11:28 PM
Freedom Recurve........the best shield I have ever sat behind in 50+ yrs of riding. Height to suit the rider. I use an 8" in summer & 12" in winter.
Title: Re: Windshields
Post by: willyB on October 18, 2012, 07:14:49 PM
7" Freedom Shield on my 2011 Street Glide. At 5'-8" it is just out of my view. Really, Really great customer service. Plus, CVO Harley gets 15% OFF. The special code is CVO.
Title: Re: Windshields
Post by: RShomo on October 19, 2012, 08:20:56 AM
I just put a 8.5'' Klock Works Dark tint Re-curve on my bike and then took a 2600 mile trip to Tenn. in the cold weather.  The windshield worked great and made the bike steadier around 18 wheelers than it was with the stock windshield.
  So far I am very satisfied.

RShomo
12 CVO Ultra
Title: Re: Windshields
Post by: red ben59 on October 19, 2012, 08:35:40 AM
FREEDOM SHIELD for me. Great customer service to boot.  :2vrolijk_21:
Title: Re: Windshields
Post by: LincolnUSA on October 19, 2012, 08:57:38 AM
Ditto on the Freedom Shield.  Love mine.  Thick and well finished.
Title: Re: Windshields
Post by: ffltjeff on October 26, 2012, 06:03:12 PM
Put a wind splitter on my 2013 CVOUC when I had the 1000 mile oil change done.  It was 35 degrees when I rode it home, only went 20 some miles but was very happy with shield.  I am 6, tall with 34 inch inseam.  Easily looked over shield, like the looks on the bike.  Distortion on the curvature will take a little getting use to but so far very happy. 
Title: Re: Windshields
Post by: rayson56 on October 26, 2012, 06:45:36 PM
Freedom shield, no distortion and  you can use a windshield bag