www.CVOHARLEY.com

CVO Technical => EVO => Topic started by: ramv102000 on November 05, 2009, 12:17:56 PM

Title: Evo cam
Post by: ramv102000 on November 05, 2009, 12:17:56 PM

Can anyone identify this cam?

Title: Re: Evo cam
Post by: Talon on November 05, 2009, 01:14:07 PM

Screamin Eagle, Intake duration 252, Exhaust 256, Overlap 40, lift .576 I think these are the correct specs for the cam.

Craig

Title: Re: Evo cam
Post by: cahdbiker on November 05, 2009, 11:59:32 PM

ramv102000, I looked in my 09 SE parts catalogue and I could not match the number 27816 on the end of the cam in the picture with any S.E. Evo cams in the book. Just to be sure you could call an HD parts dept. and they should be able to tell you exactly what it is. Good luck CAHDBIKER

Title: Re: Evo cam
Post by: Talon on November 06, 2009, 09:00:21 AM

I found it in a few palces by the SEH-57 number. Night Rider had it as SE-57, but I think it's the same.

http://www.hotbikeweb.com/tech/0910_hbkp_funny_motorcycle_engine_noises/index.html

http://www.nightrider.com/biketech/camdb.htm

Craig

Title: Re: Evo cam
Post by: ramv102000 on November 06, 2009, 11:10:59 AM

  Thanks guys
      My concern was the H, I thought it would just be marked SE 57. And the part # should be 25754 - 97 not the 27816 that is on this cam. Unless that # is a casting or batch # or something other then a part #.

       Randy

Title: Re: Evo cam
Post by: screem on November 06, 2009, 01:53:19 PM

Quote from: ramv102000 on November 05, 2009, 12:17:56 PM

Can anyone identify this cam?

It's not mine...I swear its not!! :orange:

Title: Re: Evo cam
Post by: darreldanger on February 27, 2010, 08:36:04 PM

The H just means Hydraulic

Title: Re: Evo cam
Post by: HILLSIDECYCLE.COM on March 19, 2010, 07:09:36 AM

...................or Horribly, late power. :huepfenlol2:
Scott