www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3] 4  All

Author Topic: Handlebar Postion on 2015 FLTRUSE  (Read 25054 times)

0 Members and 1 Guest are viewing this topic.

bigjohn63

  • Newbie
  • *
  • Offline Offline
  • Posts: 27
  • www.CVOHARLEY.com
    • GA


    • CVO1: 2011 roadglide ultra
Re: Handlebar Postion on 2015 FLTRUSE
« Reply #30 on: April 07, 2015, 02:38:54 PM »
I am 6 foot tall and didn't like the bars on the new RG so when we got home pulled dash and pulled the pin and moved the bars to where they feel great now
Logged

Reddog303

  • Newbie
  • *
  • Offline Offline
  • Posts: 35
  • www.CVOHARLEY.com
    • BC

Re: Handlebar Postion on 2015 FLTRUSE
« Reply #31 on: April 29, 2015, 01:21:41 AM »
Been away so Idid the same rotated to the highest pin pos. perfect now ,:)
Logged

Robmay

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2885
Re: Handlebar Postion on 2015 FLTRUSE
« Reply #32 on: May 23, 2015, 11:55:40 PM »
I've got mine off, rotated forward but am having trouble getting the chrome piece back ON. I'm afraid I'm going to break the clip on the bottom. Any tips?
« Last Edit: May 23, 2015, 11:59:24 PM by Robmay »
Logged

HogBreath

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5351
  • FLHRSEI.ORG

    • CVO1: 2009 cvo roadglide
    • CVO2: 2014 CVO StreetKing
Re: Handlebar Postion on 2015 FLTRUSE
« Reply #33 on: May 24, 2015, 09:00:54 AM »
Quote from: Robmay on May 23, 2015, 11:55:40 PM
I've got mine off, rotated forward but am having trouble getting the chrome piece back ON. I'm afraid I'm going to break the clip on the bottom. Any tips?

Ball peen hammer and a large punch?
Logged
It's not the destination. It's the Journey.

OBB

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5211
  • aka Ohiobellboy
    • OH


    • CVO1: 2011 Slate/Black SERGU** traded
    • CVO2: 2015 Double Blue SERGU
    • CVO3: 2012 SERG Blue
Re: Handlebar Postion on 2015 FLTRUSE
« Reply #34 on: May 24, 2015, 09:04:48 AM »
Take the screws out of the side of the instrument pod so it's in two pieces. Much easier (although not slip in) to get that piece back in there. FWIW, that piece is $34 at the dealer  ::)
Logged
PHOTOBUCKET IS HOLDING MY PIX HOSTAGE!!!

Robmay

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2885
Re: Handlebar Postion on 2015 FLTRUSE
« Reply #35 on: May 24, 2015, 09:36:27 AM »
Quote from: OBB on May 24, 2015, 09:04:48 AM
Take the screws out of the side of the instrument pod so it's in two pieces. Much easier (although not slip in) to get that piece back in there. FWIW, that piece is $34 at the dealer  ::)

I was just telling Ken I figured that part would be about $200...glad to hear I was wrong!  :P

I (we) have been trying to get it back on with the odometer piece loose. Hell I even took the piece off all the way and can't get it to snap back in there. I think Ken (Hogbreath) almost broke the tab off late last night, so I told him we should just leave it alone until this morning. You can see based on his reply above why I prefer not to let him work on my bike....  :drink:
Logged

HogBreath

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5351
  • FLHRSEI.ORG

    • CVO1: 2009 cvo roadglide
    • CVO2: 2014 CVO StreetKing
Re: Handlebar Postion on 2015 FLTRUSE
« Reply #36 on: May 24, 2015, 10:05:41 AM »
Quote from: Robmay on May 24, 2015, 09:36:27 AM
I was just telling Ken I figured that part would be about $200...glad to hear I was wrong!  :P

I (we) have been trying to get it back on with the odometer piece loose. Hell I even took the piece off all the way and can't get it to snap back in there. I think Ken (Hogbreath) almost broke the tab off late last night, so I told him we should just leave it alone until this morning. You can see based on his reply above why I prefer not to let him work on my bike....  :drink:

At least it was your bike and not mine buddy
Logged
It's not the destination. It's the Journey.

Trigger-Man

  • Vendor
  • Senior CVO Member
  • *
  • Offline Offline
  • Posts: 334
  • https://MotorcycleVentScreens.com
    • CO


    • CVO1: 2015 FLTRUSE Road Glide - Carbon Dust/Autumn Sunset - "quotquotTournado"quotquot
    • CVO2: 2011 FLTRUSE Road Glide - Frosted Ivory/Vintage Gold "quotquotTrigger"quotquot (traded-in)
    • Elegant Solutions Inc. dba Motorcycle Vent Screens
Re: Handlebar Postion on 2015 FLTRUSE
« Reply #37 on: May 24, 2015, 02:27:44 PM »
Quote from: Robmay on May 24, 2015, 09:36:27 AM
I was just telling Ken I figured that part would be about $200...glad to hear I was wrong!  :P

I (we) have been trying to get it back on with the odometer piece loose. Hell I even took the piece off all the way and can't get it to snap back in there.
Robmay ......check posts 26 - 28 in this thread for more info. I had no success removing that chrome piece until OBB advised loosening the two screws holding the instrument pod. That allowed for enough separation to remove and reinsert the $34 piece w/o breaking the tab off ;)
Logged
Dennis
Elegant Solutions Inc.
dba Motorcycle Vent Screens
https://MotorcycleVentScreens.com

2015 FLTRUSE:
Road Glide Triple SPLITSCREENS vent protection;
SE High-Flow Exhaust Sys w/4.5" Street Cannons & SE-585 cam;
Rockouts + S&S Premium lifters;
HD Premium Ride Front Fork + rear RWD RS-1 Adjustable Touring Shocks;
Fuel Moto Dynojet Power Vision Tuner & Wide-Band Target Tune;
6.5GTS BOOM! Audio Stage II 2 amp/4 spkr system;
TPMS;
16" Freedom Shield;
Tour-Pak Ultra Brace by eGlideGoodies

Robmay

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2885
Re: Handlebar Postion on 2015 FLTRUSE
« Reply #38 on: May 24, 2015, 05:35:41 PM »
Quote from: TRIGGER-MAN on May 24, 2015, 02:27:44 PM
Robmay ......check posts 26 - 28 in this thread for more info. I had no success removing that chrome piece until OBB advised loosening the two screws holding the instrument pod. That allowed for enough separation to remove and reinsert the $34 piece w/o breaking the tab off ;)

I have the screws loose.
Logged

Trigger-Man

  • Vendor
  • Senior CVO Member
  • *
  • Offline Offline
  • Posts: 334
  • https://MotorcycleVentScreens.com
    • CO


    • CVO1: 2015 FLTRUSE Road Glide - Carbon Dust/Autumn Sunset - "quotquotTournado"quotquot
    • CVO2: 2011 FLTRUSE Road Glide - Frosted Ivory/Vintage Gold "quotquotTrigger"quotquot (traded-in)
    • Elegant Solutions Inc. dba Motorcycle Vent Screens
Re: Handlebar Postion on 2015 FLTRUSE
« Reply #39 on: May 24, 2015, 07:27:45 PM »
Quote from: Robmay on May 24, 2015, 05:35:41 PM
I have the screws loose.
Well now .......that explains it ..LOL :D! Sorry Robmay .........I couldn't resist ;D. Seriously, I probably removed those two screws completely and was able to wiggle the black housing away from the fork lock knob just enough to slip that bugger in where it belongs. That's the best I can offer ........maybe someone else can help. Good luck with it brother!
Logged
Dennis
Elegant Solutions Inc.
dba Motorcycle Vent Screens
https://MotorcycleVentScreens.com

2015 FLTRUSE:
Road Glide Triple SPLITSCREENS vent protection;
SE High-Flow Exhaust Sys w/4.5" Street Cannons & SE-585 cam;
Rockouts + S&S Premium lifters;
HD Premium Ride Front Fork + rear RWD RS-1 Adjustable Touring Shocks;
Fuel Moto Dynojet Power Vision Tuner & Wide-Band Target Tune;
6.5GTS BOOM! Audio Stage II 2 amp/4 spkr system;
TPMS;
16" Freedom Shield;
Tour-Pak Ultra Brace by eGlideGoodies

Robmay

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2885
Re: Handlebar Postion on 2015 FLTRUSE
« Reply #40 on: May 24, 2015, 08:30:45 PM »
Yeah Trigger, that's what we're doing but it's not cooperating!

On a side note, took the bike out today to test the bar placement and I like it better.
Logged

Robmay

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2885
Re: Handlebar Postion on 2015 FLTRUSE
« Reply #41 on: May 26, 2015, 02:32:46 PM »
Did you guys that bought a piece for $34 get the CVO part? Just Priced at dealer and its $70 for the chrome piece plus $17 for the sticker insert.
Logged

OBB

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5211
  • aka Ohiobellboy
    • OH


    • CVO1: 2011 Slate/Black SERGU** traded
    • CVO2: 2015 Double Blue SERGU
    • CVO3: 2012 SERG Blue
Re: Handlebar Postion on 2015 FLTRUSE
« Reply #42 on: May 26, 2015, 06:03:26 PM »
Quote from: Robmay on May 26, 2015, 02:32:46 PM
Did you guys that bought a piece for $34 get the CVO part? Just Priced at dealer and its $70 for the chrome piece plus $17 for the sticker insert.
That dealer must not like you too much. I MIGHT have still been in my 30day new purchase 15% discount period when I bought mine but I don't think so. I'm digging up my receipt. If I can't find it tonight, I'll call the dealer tomorrow and see what part number it was they got me. Mine came with the sticker on the insert. Makes me think they're looking for the wrong part. It is a CVO restricted part I believe.
Logged
PHOTOBUCKET IS HOLDING MY PIX HOSTAGE!!!

OBB

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5211
  • aka Ohiobellboy
    • OH


    • CVO1: 2011 Slate/Black SERGU** traded
    • CVO2: 2015 Double Blue SERGU
    • CVO3: 2012 SERG Blue
Re: Handlebar Postion on 2015 FLTRUSE
« Reply #43 on: May 30, 2015, 01:43:08 PM »
Here's the receipt with the part number I bought.

Logged
PHOTOBUCKET IS HOLDING MY PIX HOSTAGE!!!

Robmay

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2885
Re: Handlebar Postion on 2015 FLTRUSE
« Reply #44 on: May 30, 2015, 08:28:29 PM »
Thank you sir. I'll check with my local dealer when I get back home.

Rob
Logged
Pages: 1 2 [3] 4  All
« previous next »
 

Page created in 0.166 seconds with 21 queries.