www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Speaker Humming  (Read 711 times)

0 Members and 1 Guest are viewing this topic.

PattiB

  • Guest
Speaker Humming
« on: July 29, 2014, 05:47:34 PM »
Can anyone tell me why my kit speakers start humming when I plug in the Harley Auxiliary brake light/running light/turn signal conversion kit #69462-06C.  I have a 2004 CVO Electric Glide. Any help would be great. Thanks Roger
Logged

millmutt

  • Newbie
  • *
  • Offline Offline
  • Posts: 38

    • CVO1: 2004 SEEG
    • CVO2: 2007 FXDSE
    • CVO3: 2011 FLSTSE2
Re: Speaker Humming
« Reply #1 on: July 29, 2014, 11:36:45 PM »
I had a radio static problem with my 04 SEEG. Turned out it was a loose battery ground cable. The bike never showed any signs like hard starting on anything like that. Once I snugged down the cable all was good.

Millmutt
Logged

PattiB

  • Guest
Re: Speaker Humming
« Reply #2 on: July 30, 2014, 12:54:52 AM »
Checked cables, they are tight. I forgot to mention that the radio is not on when it is humming.
Logged

SmokeyJoe

  • 2012 RGC CVO
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 684
    • MS


    • CVO1: 2012 Road Glide
Re: Speaker Humming
« Reply #3 on: July 31, 2014, 12:28:15 AM »
Check grounds

Was it plug and play or did you have to make connections on your own?
Logged
FuelMotos exhaust and tuning, Ohlins Front/Rear

PattiB

  • Guest
Re: Speaker Humming
« Reply #4 on: July 31, 2014, 01:01:52 AM »
It was plug and play. Plugged into the rear light harness under the seat. Ran a wire from the speaker bracket to the negative on the battery and that did not help.
Logged
 

Page created in 0.123 seconds with 22 queries.