www.CVOHARLEY.com
CVO Technical => Electronic Toys and Gadgets => Topic started by: michaelokielee@yahoo.com on January 13, 2019, 12:11:15 PM
-
Running lights work on TP and bike. Left signal works on TP and bike:. Right signal only works on bike, stays steady,no flash on Tour Pak on 2019 FLTRXSE. Checked all the connections and didn’t find any issues; any suggestions, I don’t have manuals for the bike yet?
-
Running lights work on TP and bike. Left signal works on TP and bike:. Right signal only works on bike, stays steady,no flash on Tour Pak on 2019 FLTRXSE. Checked all the connections and didn’t find any issues; any suggestions, I don’t have manuals for the bike yet?
Not sure if this helps but I have used this little break out from Custom Dynamics for other projects in the past. You can use it to identify wires to tap to feed your LEDs?? The connector is under your seat next to the Fuel Pump connector.
https://www.amazon.com/gp/product/B00T6JHB76/ref=ppx_yo_dt_b_asin_title_o05__o00_s00?ie=UTF8&psc=1
Black—Ground
Blue— Running
Red— Brake
Brown—Right Turn/Brake
Purple—Left Turn/Brake
Orange—Aux Power
-
Not sure if this helps but I have used this little break out from Custom Dynamics for other projects in the past. You can use it to identify wires to tap to feed your LEDs?? The connector is under your seat next to the Fuel Pump connector.
https://www.amazon.com/gp/product/B00T6JHB76/ref=ppx_yo_dt_b_asin_title_o05__o00_s00?ie=UTF8&psc=1
Black—Ground
Blue— Running
Red— Brake
Brown—Right Turn/Brake
Purple—Left Turn/Brake
Orange—Aux Power
Thank you, I also had a problem with my multimeter, I am going to buy a test light today and use it. I will test the bike only to get the right wire and then hook up the Tour Pak harness and chase it down that way. Thanks again!!