www.CVOHARLEY.com
Custom Vehicle Discussions => Screamin' EagleĀ® Road KingĀ® => Topic started by: Serkcus on September 15, 2007, 04:00:43 PM
-
Taken front nacelle off and now have two grey wires to connect- where. Instructions assume passing Lamps were previously installed. The two sitches each have factory wired plugs on them , the one on right has a red and a orange wire running through the plug to the switch and the left has a yellow and a grey wire at the plug that connects to the switch. Where do I connect or have all that have this passing lamp installed relied on the dealer? Help would be greatly appreciated.
-
you have a small white connector. much smaller then the ones on the 2 switches.
-
not pics of my bike. but this is what you are looking for
-
if the passing lamps did not come with the pins and connector you can get them from your dealer.
-
Thanks, that made it easily do-able. Works kike a charm. :bananarock: