Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Serkcus]

Taken front nacelle off and now have two grey wires to connect- where. Instructions assume passing Lamps were previously installed. The two sitches each have factory wired plugs on them , the one on right has a red and a orange wire running through the plug to the switch and the left has a yellow and a grey wire at the plug that connects to the switch. Where do I connect or have all that have this passing lamp installed relied on the dealer? Help would be greatly appreciated.

[naitram]

you have a small white connector. much smaller then the ones on the 2 switches.

[naitram]

not pics of my bike. but this is what you are looking for

[naitram]

if the passing lamps did not come with the pins and connector you can get them from your dealer.

[Serkcus]

Thanks, that made it easily do-able. Works kike a charm.