Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[RJ749]

Looks great, sounds like I need to get my cousin to order one for his Street Glide.

[skyglide]

Nice add on

[T MAC]

That is a cool addition to your Scooter!

[icybay]

In case anyone is interested, here is the parts list for the FLHX ground effect package, prices are 20% off of list:

Ground Effects, price $63.64 part no. 59739-06 (color code: BXT (cobalt blue), BPY (black pearl), BPS (black cherry) and DH (vivid black)

Rear Fender Light Assembly, 69375-06, price $49.34

Conduit, wire harness, price $6.47

Pin Housing, 3-way, price $.82, part no. 73103-96BK

Pin Terminal, part no. 73190-96, price $.31

Stud Plate, part no. 59818-06, price each $5.95 (requires 2)

Ground Effects Support, part no. 59790-06, price $5.40

Bumper, part no. 59581-05, price $2.73

Screw, part 3596, price $.72 (2)

Flange nut, part 7499, price $1.16 (6)

Grommet, part no. 59778-06,

To copy the FLHX license plate mounted below the brakelight, order Bullet Rear Turn Signal and License Plate Relocation Kit, part no. 53702-04 about 195.00

[RJ749]

Hey good news if you want to get the Street Glide rear fender light.

NO RESTRICTION ON FLHX FENDER LIGHT

I got the VIN off my cousins and the HD Shop said they can get hammered by the MoCo if they don't document the sale etc. but it wasn't an issue any longer since the part is no longer on restriction.

[d o g o l s]

great job 

[TimBone]

Thanks for the compliments.  Very easy install with the 3M doublesided tape.  I just went to Key West and back
for a 1500 mile ride and no issues on the tape coming off.  It is STUCK on there and no drilling into the fender!
Plus the added light to rear is a nice bonus!!!

[RJ749]

Thanks for the compliments.  Very easy install with the 3M doublesided tape.  I just went to Key West and back
for a 1500 mile ride and no issues on the tape coming off.  It is STUCK on there and no drilling into the fender!
Plus the added light to rear is a nice bonus!!!

I really like the tape idea, the holes needed for standard mounting was bugging me a bit.  Mine should arrive shortly, really think it is a nice add to our bikes.

[RJ749]

Mine parts are in, waiting to get the reg. recall at the same time.

[TimBone]

Great, I got the 3M tape at the local AutoZone, and inexpensive too.
Show some pics whenyou get it done.

[RJ749]

Got the install done on the Street Glide fender light for my SEUC.  Man it looks killer with the black fender and light.

Unfortuately I couldn't get pics as my bike is torn down for the front fork work at Traxxion and it's on a rolling lift and stuck back in the corner or the shop behind a bunch of bikes.

Couple of weeks it'll be out and I'll have pics then for sure.  The light does actually almost clip onto the bottom of the fender so with the tape application it isn't going anywhere.

[hard10]

Got the install done on the Street Glide fender light for my SEUC.  Man it looks killer with the black fender and light.

Unfortuately I couldn't get pics as my bike is torn down for the front fork work at Traxxion and it's on a rolling lift and stuck back in the corner or the shop behind a bunch of bikes.

Couple of weeks it'll be out and I'll have pics then for sure.  The light does actually almost clip onto the bottom of the fender so with the tape application it isn't going anywhere.

Roger, did you do the Custom Dynamics light strip as well? I wonder if this would be over kill?

[RJ749]

You mean the tour pak light from Custom Dynamics and the fender light.  I suppose there's always that chance, but the custom dynamics light is fairly small and so is the street glide running light. 

If the fender light was also a brake light it might be confusing but it isn't so I thin it will be fine.

It looks clean and heck IMHO. 

I'm updating the pic here now that mine is done and IMHO there isn't too much lite so as to make it overwhelming or tacky.

[sadunbar]

I am at it again, just added this puppy to my bike!  Nothing like some extra light on the rear and I was really digging this on the Street Glides.
You guys have heard me talk about my buddies with the FLHX Street Glides and their Zippers TMax gear, so I had to get me that cool looking light for
my fender.
Install was very easy and instead of drilling into the Fender, I went with the SUPER sticky 3M double sided tape and it should hold nicely on the fender.  Wiring was a cinch and it plugged right into the open plug in the Tour Pak!

Does anyone know if the Bushtec Vertical Receiver would work with this fender extension?  Is their enough clearance?

Scott

[HWYMAN1]

You mean the tour pak light from Custom Dynamics and the fender light.  I suppose there's always that chance, but the custom dynamics light is fairly small and so is the street glide running light. 

If the fender light was also a brake light it might be confusing but it isn't so I thin it will be fine.

It looks clean and heck IMHO. 

I'm updating the pic here now that mine is done and IMHO there isn't too much lite so as to make it overwhelming or tacky.

roger,
I think it looks great, but I am partial to the bike you have! Did you paint the street glide piece or leave it black? John