www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2  All

Author Topic: break light  (Read 5909 times)

0 Members and 1 Guest are viewing this topic.

flibb

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 234
break light
« on: December 23, 2014, 02:40:35 PM »
on a 2015 rug the brake light bar should light up the whole way across when you apply the brakes. I  put the light bars on the saddle bags and it worked fine.  But today i noticed the turn signals in the tour pak and the saddle bags will not get brighter when i apply the brakes.  Its a plug and play so not that difficult .. wonder could a fuse or something be blown.   the running lights and turn signals work on both

« Last Edit: December 24, 2014, 04:30:04 PM by flibb »
Logged


2008 rocker c, 2003 fatboy, 2015 rgu

Ghost__Rider

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 610
Re: break light
« Reply #1 on: December 23, 2014, 04:13:04 PM »
Sounds like the Module that comes with the saddle bag light kit might be defective. I have the same set up on mine and one of my saddle bag lights quit. They are a MutherDucker to get off the bags.
Logged
2017 CVO SG, Suburban Speed 130" kit, Fullsac Stainless DXpipe, 2" Fullsac Cores,2014 CVO Limited, Fullsac DXpipe, Fullsac 2 1/4"CVO cores, TTS Matertune w/Fullsac Custom Map, Andrews 54 Cams. Spank You Very Much!!!
2012 Street Glide, 107cu.in./.625 T-Man cams, SE Pro CNC ported Heads, 10.8 Comp., 58mm ThrottleBody, 5.3inj, D&D Borzilla 2in1 Exhaust

OBB

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5216
  • aka Ohiobellboy
    • OH


    • CVO1: 2011 Slate/Black SERGU** traded
    • CVO2: 2015 Double Blue SERGU
    • CVO3: 2012 SERG Blue
Re: break light
« Reply #2 on: December 23, 2014, 04:45:34 PM »
Damn, now you guys are scaring me from putting mine on. I haven't even opened them yet. How do they attach?
Logged
PHOTOBUCKET IS HOLDING MY PIX HOSTAGE!!!

Ghost__Rider

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 610
Re: break light
« Reply #3 on: December 23, 2014, 05:18:25 PM »
They have 3M tape. And it's good Sh*t too.
Logged
2017 CVO SG, Suburban Speed 130" kit, Fullsac Stainless DXpipe, 2" Fullsac Cores,2014 CVO Limited, Fullsac DXpipe, Fullsac 2 1/4"CVO cores, TTS Matertune w/Fullsac Custom Map, Andrews 54 Cams. Spank You Very Much!!!
2012 Street Glide, 107cu.in./.625 T-Man cams, SE Pro CNC ported Heads, 10.8 Comp., 58mm ThrottleBody, 5.3inj, D&D Borzilla 2in1 Exhaust

flibb

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 234
Re: break light
« Reply #4 on: December 23, 2014, 06:04:10 PM »
haven't been on there a month 
Logged


2008 rocker c, 2003 fatboy, 2015 rgu

Ghost__Rider

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 610
Re: break light
« Reply #5 on: December 23, 2014, 07:40:36 PM »
unplug the module and reconnect and test tourpak lights again. If they work correctly you will know it's the light module. Mine were on for about 2 months before the left light quit.
Logged
2017 CVO SG, Suburban Speed 130" kit, Fullsac Stainless DXpipe, 2" Fullsac Cores,2014 CVO Limited, Fullsac DXpipe, Fullsac 2 1/4"CVO cores, TTS Matertune w/Fullsac Custom Map, Andrews 54 Cams. Spank You Very Much!!!
2012 Street Glide, 107cu.in./.625 T-Man cams, SE Pro CNC ported Heads, 10.8 Comp., 58mm ThrottleBody, 5.3inj, D&D Borzilla 2in1 Exhaust

flibb

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 234
Re: break light
« Reply #6 on: December 23, 2014, 09:30:12 PM »
thanks
Logged


2008 rocker c, 2003 fatboy, 2015 rgu

flibb

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 234
Re: break light
« Reply #7 on: December 23, 2014, 09:46:59 PM »
i haven't been able to check it yet. but if it is the module i won't have to remove the lights right?
Logged


2008 rocker c, 2003 fatboy, 2015 rgu

flibb

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 234
Re: break light
« Reply #8 on: December 24, 2014, 02:07:04 PM »
just disconnected the saddle bag lights and nope the turn signal part of the tour pack will not light up when you hit the brakes.  The whole thing does light up right?
Logged


2008 rocker c, 2003 fatboy, 2015 rgu

OBB

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5216
  • aka Ohiobellboy
    • OH


    • CVO1: 2011 Slate/Black SERGU** traded
    • CVO2: 2015 Double Blue SERGU
    • CVO3: 2012 SERG Blue
Re: break light
« Reply #9 on: December 24, 2014, 04:03:02 PM »
Quote from: flibb on December 24, 2014, 02:07:04 PM
just disconnected the saddle bag lights and nope the turn signal part of the tour pack will not light up when you hit the brakes.  The whole thing does light up right?

I was thinking just the center light.... let me go check real quick....

On mine, just the center portion lights up with the brake.
« Last Edit: December 24, 2014, 04:06:02 PM by OBB »
Logged
PHOTOBUCKET IS HOLDING MY PIX HOSTAGE!!!

flibb

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 234
Re: break light
« Reply #10 on: December 24, 2014, 04:32:20 PM »
was at the dealer yesterday and applied brake to a ultra  and the whole bar lit up.   Huh .  But anyway the saddle bag lights should work with the brake also so I'm not sure what is going on.
Logged


2008 rocker c, 2003 fatboy, 2015 rgu

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: break light
« Reply #11 on: December 24, 2014, 04:58:26 PM »
Did you use the module and harness specific to the CVO, or the one in the kit?  The kit listed in the online catalog has a note under "fitment" that the kit does not work with the CVO Limited or CVO Road Glide.  I read another thread around here that mentioned a different module and harness part number that is for the CVO's, Wire Harness W/Module-Firmware 69200949.  I have no idea if this could be related to your problem, just thought I'd mention it.  :nixweiss:   

http://www.cvoharley.com/smf/index.php?topic=99256.msg1287653#msg1287653

Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

flibb

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 234
Re: break light
« Reply #12 on: December 24, 2014, 05:58:07 PM »
ill check that out but it worked when i first installed it.  Also still wondering if the whole light bar should be lit when you apply the Brake
Logged


2008 rocker c, 2003 fatboy, 2015 rgu

Ghost__Rider

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 610
Re: break light
« Reply #13 on: December 24, 2014, 07:23:20 PM »
On mine only the center of the tourpak lights up on brake also. GRC is correct the kit for a Regular ultra won't work on a CVO limited. My dealer gave me the kit for a Ultra limited the first time and the saddle bag lights wouldn't brighten on brake. The lights are the same but the module is different. They got me a different light kit for the CVO limited and all I did was swap the modules. Hopefully that's your issue. I miss understood your problem the first time I read your post.
Logged
2017 CVO SG, Suburban Speed 130" kit, Fullsac Stainless DXpipe, 2" Fullsac Cores,2014 CVO Limited, Fullsac DXpipe, Fullsac 2 1/4"CVO cores, TTS Matertune w/Fullsac Custom Map, Andrews 54 Cams. Spank You Very Much!!!
2012 Street Glide, 107cu.in./.625 T-Man cams, SE Pro CNC ported Heads, 10.8 Comp., 58mm ThrottleBody, 5.3inj, D&D Borzilla 2in1 Exhaust

flibb

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 234
Re: break light
« Reply #14 on: December 24, 2014, 07:27:41 PM »
do you have part number for the module and why won't the turn signal part of the tour pack light up i wonder. 
Logged


2008 rocker c, 2003 fatboy, 2015 rgu
Pages: [1] 2  All
« previous next »
 

Page created in 0.57 seconds with 22 queries.