I took my 2011 console off, the bottom of the insert is painted black. I sanded with some fine sandpaper, the lettering and logo are under the black paint and seem to be silk screened to the underside of the insert. I think if sanded carefully to expose but not remove the lettering then touch-up (cover) the exposed surrounding background the led light will show through translucent lettering and logo. It will take some time and careful work but it can be done. I have pictures of the sanded bottom side of the insert But for some reason they wont upload. There also is a 12V harness under the console which looks like it would plug into the 2012 light assy. I am off to Sturgis so I will be continuing the quest when I return.