www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Street Glide® => Topic started by: BAKRDS on October 28, 2009, 07:50:25 PM
-
OK Seems there's not much support for Danny Grey seats.Anybody know if a Corbin Classic Solo will work with a solo tour pac rack.Had to cut & weld the rack on my '04.Just as soon not have to do that again.
-
It works with a solo luggage rack which should mean it will work with a solo TP rack.
-
I'd like to see a pic of the SESG with Corbin Classic Solo and the solo king tour pack. :2vrolijk_21:
-
So send me your tourpack and I will supply the rack :huepfenlol2:
-
So send me your tourpack and I will supply the rack :huepfenlol2:
That does it!..........you finally made me spend some money. The solo tour pack rack is going on my list. :huepfenlol2:
-
That does it!..........you finally made me spend some money. The solo tour pack rack is going on my list. :huepfenlol2:
yeah.....like you needed me to help you spend money...sure.....right......
-
Called Corbin today & they said it won't fit.Problem I had with my '04 was the the rear of the seat that covered the lock stud kept the tour pac rack from going foreward.Ended up cutting & rewelding the rack.Not something I want to do again on a $200 part.Very interested to see how you make out.
-
Called Corbin today & they said it won't fit.Problem I had with my '04 was the the rear of the seat that covered the lock stud kept the tour pac rack from going foreward.Ended up cutting & rewelding the rack.Not something I want to do again on a $200 part.Very interested to see how you make out.
Wouldn't that mount in the same location as the solo luggage rack??? Here is a pic of JC's bike with the solo luggage rack and the Corbin Classic Solo seat. Sorry to steal your pic JC :)
-
Mounts on the same quick detach lugs,but might extend foreward more.Like to know for sure before I order another brand.
-
The 09 and 10 Corbin bike seats mount just the opposite as the 04 (other wise, I could have used my existing Corbin). With the 10, the tongue is at the back and the mounting pin is at the fuel tank.
Who did you talk to at Corbin? Which one did you call Cali. or Fla?
I can see where it would be an issue on the 04 but I'm not sure it will not work on the 10.
-
The 09 and 10 Corbin bike seats mount just the opposite as the 04 (other wise, I could have used my existing Corbin). With the 10, the tongue is at the back and the mounting pin is at the fuel tank.
Who did you talk to at Corbin? Which one did you call Cali. or Fla?
I can see where it would be an issue on the 04 but I'm not sure it will not work on the 10.
That's a good point..he did say the REAR of the seat and the lock pin.
-
Don't know who I talked to in Calf.but made sure he knew I was talking '10.If the post is in the front there's no reason they couldn't make it fit.Just as soon not have to send it back 2 or 3 times through.
-
it will fit, the 2010 SESG has the same setup as the 09 SERG
-
As I suspected. The people that work in the offices at Corbin don't have a clue what goes on out in the factory. When seats are custom fitted (ride in) there isn't any log of that kept. So they don't know what will fit what unless they've personally done it theirself. That's an area where customer service could improve greatly.
There are so many variations just for HD alone. Couple that with all the other makes and models that they're trying to stay current with and you can see where it would be a challenge logistically to track all the various options for each make and model.
-
Thanks Larry,
That's the picture I wanted to see.Was that a ride in or phone order job?You've got some great riding down there.My sister lives in Tullahoma.
-
that was a call in order, but I knew what I was getting into and have dealt with Corbin for awhile