I have an 2019 Ultra Limited CVO. I was handed a bunch of parts after paying a large sum of money saying they would work for this boom 2 audio.
I am curious if anyone has installed the boom audio stage 2 setup on their ultra limited. It seems from my wire harness that maybe the speakers are all wired into 1 big harness and are not split out front / back for me to tap into with the 4 prong plugs.
We put the front and rear speakers in and ran all the wires and where the plugs were supposed to go (pink and blue wires) there is no connection for them under the fairing.
Any help would be appreciated.
Sounds like you may be missing one or more of the following:
Interconnect Harness – ’18-later 69201930
Jumper Harness 69200489
Installation Kit – ’17-later 76000745
This is based upon the informational sheet provided by Serdvd6.
However, as others have stated, why go boom 2? Being a CVO RG owner and living with the "Boom 2" I can tell you it isn't all its cracked up to be. 1 front speaker and two rears in a year and a half its time for a change.
Lots of research here.. see what others say about different products.