Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: CVO FXR slider tube (#45395-92) length?  (Read 2846 times)

0 Members and 2 Guests are viewing this topic.

JamesButler

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 143
CVO FXR slider tube (#45395-92) length?
« on: August 02, 2017, 03:21:15 PM »

Anyone know the LENGTH of the FXR2,3 and 4 slider tubes :p/n 45395-92?   

Parts catalogs show the slider tube part #45395-92 for these models is also the stock slider tube on various other models including the many mid-to-late 90's models FXD's, and early to mid 90's Huggers.

Always assumed that the single-disc CVO FXR 2 and 3 had the same slider tube length as all the '87-'94 single-disc FXR models, which were 23 and 3/8"long (p/n 45381-87).  In addition, Sportster 1200 models up to '93 came stock with these same sliders. 

If no length difference, then what is the difference between the two parts; cosmetic, finish?  :scratch:

as most of us know there is a 2"- length difference between the stock '87-'94 dual-disc FXR models and the '87-'94 single-disc FXR models
(25 and 3/8" vs 23 and 3/8"), but there is not a front fork length difference between the single-disc CVO FXR's (FXR2 and 3) and the dual-disc FXR4...   

« Last Edit: August 02, 2017, 05:00:23 PM by JamesButler »
Logged

JamesButler

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 143
Re: CVO FXR slider tube (#45395-92) length?
« Reply #1 on: August 06, 2017, 09:39:14 AM »

Thanks to all of you for the great responses. To anyone interested in this stimulating topic, I just found this attached thread below on a Sportster site.  Looks like the OP measured the tubes "at a tad" under 24 and 3/16"...

http://xlforum.net/vbportal/forums/showthread.php?t=65275&highlight=part+%2345395-92
Logged
 

Page created in 0.124 seconds with 24 queries.