Topic: Nacelle Finally Completed!!! (Read 6786 times)

Miked · « **on:** December 02, 2006, 01:42:08 PM »

Finally got my nacelle on the right way with a road king tac mount.

Miked · « **Reply #1 on:** December 02, 2006, 01:55:11 PM »

more pics

Miked · « **Reply #2 on:** December 02, 2006, 01:57:43 PM »

Anyone know how to modify the size of the pics? I have more but the files are too big. I'm not too computer literate!@OI#)*!!!

Fired00d · « **Reply #3 on:** December 02, 2006, 09:06:23 PM »

Quote

Anyone know how to modify the size of the pics?

fatboyse2 · « **Reply #4 on:** December 02, 2006, 10:04:03 PM »

Great look Miked [smiley=xyxthumbs.gif] Please post some more Pics. I've been thinking about doing this too. How much do you need to raise the bars to accomodate the nacelle. do you see the spacer or is it covered up.

Miked · « **Reply #5 on:** December 03, 2006, 06:57:48 PM »

Hey Firedood,
I also had trouble making my picture on the profile, any way you could make my second pic on this listing my profile pic?
Thanks

Miked · « **Reply #6 on:** December 03, 2006, 07:03:28 PM »

There are several ways you can do this, one way is using either 1/2 or 1 inch risers. You can keep your original tach mount that way. I had mine modifed to accomodate the road king tach mount. You will have to drill a hole for the hydraulic clutch line. If you use the riser method, keep you cover for the middle bolt, because it will expose some of the top of your triple trees. If you go with the road king tach mount, it will require some machining work, Harley didn't make the tach mount to fit the fat handle bars. Good luck and post the pics when your done.

PS harley should have done this with the SE Fat Boys to start off with, it consistent with fat rear end.

Fired00d · « **Reply #7 on:** December 03, 2006, 07:03:58 PM »

Quote

Hey Firedood,
I also had trouble making my picture on the profile, any way you could make my second pic on this listing my profile pic?
Thanks

Miked,
I have resized it for your avatar, but I can't change it to your avatar. You can go here - How To Add or Change Your Avatar for instructions on how to do it. If you still having trouble shoot me a PM and I'll try to walk you through it.

[smiley=pumpkin.gif]
Ride Safe,
Fired00d
[smiley=fireman.gif]

Fired00d · « **Reply #8 on:** December 03, 2006, 08:48:22 PM »

Miked,
In your profile where it asks for location of your avatar use (copy/paste) this url - http://flhrsei.org/yabb2/Attachments/mikedava.jpg

[smiley=pumpkin.gif]
Ride Safe,
Fired00d
[smiley=fireman.gif]

AUSSIE_FLSTFSE · « **Reply #9 on:** December 04, 2006, 06:03:11 AM »

Miked,
excellent look, great to see a bit of creativity. Bummer about the weather over there, its really good weather here right now & was around 100 degrees on the weekend. Keep those snapshots coming.

Cheers
Aussie

kona76 · « **Reply #10 on:** December 04, 2006, 09:41:19 AM »

Hey Miked,

That looks real sharp. Super clean look. You did a great job.

dagbre · « **Reply #11 on:** January 05, 2007, 02:27:39 PM »

Awesome look! Pure and powerful. What engine guard have you installed? Looks like the OEM Mustache. I am considering that one myself.

Hoist! · « **Reply #12 on:** January 05, 2007, 03:51:34 PM »

Quote

Awesome look! Pure and powerful. What engine guard have you installed? Looks like the OEM Mustache. I am considering that one myself.

Hey dagbre, what's this mean: M

The Mysterious Q! · « **Reply #13 on:** January 05, 2007, 03:57:07 PM »

Thats a fine looking well detaioed scoot Miked! Later,Q

AUSSIE_FLSTFSE · « **Reply #14 on:** January 05, 2007, 05:35:56 PM »

Quote

Hey dagbre, what's this mean: [highlight]M

Fired00d · « **Reply #15 on:** January 05, 2007, 05:38:02 PM »

Quote

I was wondering the same thing!

Cheers
Aussie

Me makes three. I even found a translator website, but it wouldn't translate it.

[smiley=pumpkin.gif]
Ride Safe,
Fired00d
[smiley=fireman.gif]

AUSSIE_FLSTFSE · « **Reply #16 on:** January 05, 2007, 05:39:41 PM »

Miked,
I just noticed you have a different trim ring around your head light, what is the number for that part. Its looks a bit better than the one I have that came with the Nacelle.

Cheers
Aussie

Miked · « **Reply #17 on:** January 08, 2007, 07:18:08 AM »

That is the oem mustache enging guard. Although I like to call them foot rests! I'll get the #'s on the trim ring, it's the road king trim ring, deep dish, i dont know what exactly hd calls them. Thanks for the compliments, still in the garage, rainy days in Georgia

AUSSIE_FLSTFSE · « **Reply #18 on:** January 08, 2007, 07:30:52 AM »

Miked,
Thanks in advance for looking for the part number.

cheers
Aussie

Hoist! · « **Reply #19 on:** January 08, 2007, 09:32:14 AM »

Quote

Miked,
Thanks in advance for looking for the part number.

cheers
Aussie

Miked that looks great!

Hey Aussie. That looks like the "Frenched-in" trim ring I ordered for my new SERK. I ordered that for the headlight and matching ones for the Aux Lites I'm installing.
Headlight: 69627-99 USA List $34.95; Aux Lites: 69622-99B USA List $39.95

Hoist!

AUSSIE_FLSTFSE · « **Reply #20 on:** January 08, 2007, 06:04:48 PM »

Quote

Miked that looks great!

Hey Aussie. That looks like the "Frenched-in" trim ring I ordered for my new SERK. I ordered that for the headlight and matching ones for the Aux Lites I'm installing.
Headlight: 69627-99 USA List $34.95; Aux Lites: 69622-99B USA List $39.95

Hoist!

Miked · « **Reply #21 on:** January 09, 2007, 09:20:27 PM »

Hoist thats going to look kick@, post some pics

dagbre · « **Reply #22 on:** January 10, 2007, 10:32:27 AM »

Quote

Hey dagbre, what's this mean: M

EAGLE1 · « **Reply #23 on:** January 10, 2007, 07:12:39 PM »

Quote

Hi Hoist!

It's old Norse, from a medieval Norwegain Viking manuscript. I will try to translate it: "Moderately wise a man should be. Too wise he should not be, for seldom is Love to find in the heart of him who is too wise."

is that like the american saying "love is blind" [smiley=huh.gif]

AUSSIE_FLSTFSE · « **Reply #24 on:** January 10, 2007, 08:25:57 PM »

Quote

is that like the american saying "love is blind" [smiley=huh.gif]

are you sure thats american? or are we all just blind?

Cheers
Aussie

Hoist! · « **Reply #25 on:** January 11, 2007, 01:14:08 AM »

Quote

Hi Hoist!

It's old Norse, from a medieval Norwegain Viking manuscript. I will try to translate it: "Moderately wise a man should be. Too wise he should not be, for seldom is Love to find in the heart of him who is too wise."

Thanks dagbre. So in other words, don't be a wise ass if you wanna get la$d?

Sorry dagbre, I couldn't resist.

Hoist!

dagbre · « **Reply #26 on:** January 12, 2007, 01:25:22 PM »

Haha, yea maybe, Hoist. Old way to say that passion and logic don't mix very well. Follow your inner feelings, and timeless stuff like that. Enjoy life, guys! There's truly a lot of beauty out there.

TexasBowhunter · « **Reply #27 on:** February 23, 2007, 11:14:48 PM »

The nacelle is da' bomb on the Fatboy
SWEEEET...
paul

altugo · « **Reply #28 on:** March 04, 2007, 06:42:19 PM »

Heres my version for the nacelle.

altugo · « **Reply #29 on:** March 04, 2007, 06:43:06 PM »

altugo · « **Reply #30 on:** March 04, 2007, 06:44:04 PM »

and more

altugo · « **Reply #31 on:** March 04, 2007, 06:46:33 PM »

altugo · « **Reply #32 on:** March 04, 2007, 06:47:41 PM »

altugo · « **Reply #33 on:** March 04, 2007, 06:49:57 PM »

altugo · « **Reply #34 on:** March 04, 2007, 06:51:03 PM »

and still

altugo · « **Reply #35 on:** March 04, 2007, 06:52:02 PM »

altugo · « **Reply #36 on:** March 04, 2007, 06:52:51 PM »

altugo · « **Reply #37 on:** March 04, 2007, 06:54:20 PM »

Final pic i didnt have to change any cables just put 2 home made aliminium discs it worked.

EAGLE1 · « **Reply #38 on:** March 04, 2007, 07:56:22 PM »

Quote from: altugo on March 04, 2007, 06:49:57 PM

more

Looks good Altugo

the Nac, gives the Fatty the look it needs!!
I have heard a lot of good things about the performance of the Thunderheader 2in1, and I actually like the way the pipes flow from the engine, and look great up to the point where they merge, then (for whatever reason escapes me) it just looks like someone hobbled together a bunch of scrap they found in an alley, I would seriously consider the Thunderheader 2in1 pipes if they would have made the muffler look cleaner and less eclectic,
I just don't get it, but I guess it could be the look they were going for $:-\$

sorry for the rant, Its all Good!

Hoist! · « **Reply #39 on:** March 04, 2007, 08:03:32 PM »

Altugo, you got that SEFB looking great! You must be the talk of Turkey! Great job man! Hoist!

altugo · « **Reply #40 on:** March 05, 2007, 04:40:44 AM »

Eagle the only reson for me to go with the thunder headers was the performance issue.It was recomended by another member from this site.I really like the performance and the deep rumble but in esthetics department they kinda fail a little.But theres not many bikes with them on around here i just saw two more and they were both Titans.A guy even said "oh you got Titan exhaust".So they get a lot of attention somehow.Most popular pipes here are screamin eagles than some vance and hines and supertrapp.Samsons are on some bikes as well.

altugo · « **Reply #41 on:** March 05, 2007, 04:43:48 AM »

Thanks for the compliments Howie!!I am checkin on your upgrades on other threads your bike sure looks good.Good luck with performance upgrades.

AUSSIE_FLSTFSE · « **Reply #42 on:** March 06, 2007, 05:04:49 AM »

Altugo,
I see you also have the other trim is that a recent addition? or did I just miss it in your early pics.

Cheers
Aussie

altugo · « **Reply #43 on:** March 07, 2007, 06:20:08 PM »

Yeah Mike i wasnt able to post pics that i had in a while because of the file size issue all those pics are from my new telephone and they seem to fit well to our site.Thats what the bike looks like now minus windshield and sissybar that I left at home that day

MikeD · « **Reply #44 on:** March 15, 2007, 07:51:42 PM »

Alright, it almost looks as good as mine! Good job with it! What did you do with the open space over the main bolt where the triple trees?

altugo · « **Reply #45 on:** March 16, 2007, 04:33:31 AM »

I found 2 little screw heads and placed them there ill take a pic and post.

The Mysterious Q! · « **Reply #46 on:** March 17, 2007, 11:29:25 AM »

Very nice Altugo .Very nice.

Later,Q

dagbre · « **Reply #47 on:** June 02, 2007, 02:20:15 PM »

Lovely!

I have to get a nacelle. It never ends...

CVOJOE · « **Reply #48 on:** June 02, 2007, 04:48:46 PM »

That looks great, the way the MOCO should have done in the first place. Almost has a SERK look to it now

Joe

kona76 · « **Reply #49 on:** June 03, 2007, 09:30:18 AM »

Altugo,

Your ride has all of us wagging our tounges and drooling over here at my place.

See, I'm out in the garage bragging about the FatBoy that inspires OCD and I send in someone to look at our CVO site. He comes back to the garage, gets us to view some guy's latest completion and lo and behold, it's your ride, not mine. Or our Aussie's. Or ....

They are raving mad about your ride my friend. With due cause I might add. Just a work of art. "Great work" from 10 wanna be CVO owners, and 1 who is.

From OCD Central,

Kona76
Mike K.

altugo · « **Reply #50 on:** June 04, 2007, 03:08:56 PM »

Thanks Kona great compliments.

stichwilliams · « **Reply #51 on:** June 19, 2007, 06:48:42 PM »

That is Really Nice!
Gotta get me one for my 05 FLSTFSE

purple haze · « **Reply #52 on:** July 14, 2007, 07:25:20 PM »

Sorry for being nosey and if you do not wish to say its cool! But how much is a NACHELLE? And not a TECH. are they expensive to have installed? They really look like the old style chopper to me, but I would like to put more bling on my bike, thanks for any and all replys!! PURPLE HAZE.

Seegarsmkr · « **Reply #53 on:** July 14, 2007, 11:56:51 PM »

I think it is unanimous that ride looks BAS @SS!! Awesome job!!!! that Nac is PHAT and that is good for a Fat Boy. Stays with the theme of the big front end...they SHOULD have done that from the factory!!!

Seegarz

altugo · « **Reply #54 on:** July 15, 2007, 04:28:22 AM »

Quote from: purple haze on July 14, 2007, 07:25:20 PM

Sorry for being nosey and if you do not wish to say its cool! But how much is a NACHELLE? And not a TECH. are they expensive to have installed? They really look like the old style chopper to me, but I would like to put more bling on my bike, thanks for any and all replys!! PURPLE HAZE.

Haze heres the link:
http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524441845095&FOLDER%3C%3Efolder_id=2534374309169415&ASSORTMENT%3C%3East_id=2534374309169415&CONTENT%3C%3Ecnt_id=10134198674778881&bmUID=1184487953107&bmLocale=en_US

It costs 399 and about 320 at chicago harley. Installation is a pain in the ass if you are mechanically challanged like me you need to dissassemble the whole front.

MikeD · « **Reply #55 on:** July 15, 2007, 07:23:42 PM »

it's going to be about two hours worth of labor too. I dont know how you can get rid of the the tach wiring. All in all its somewhere around 500 to 600 completed. It's just money, you'll make more! Plus its the best modification to the cvo fatboyz!

Brent · « **Reply #56 on:** July 24, 2007, 05:05:07 PM »

Looks really nice!!

Author Topic: Nacelle Finally Completed!!! (Read 6786 times)

MikeD

MikeD