Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Bav]

If I fitted a 117 kit to my 2014 SERK would the bits I take off fit my girlfriends 2015 103 Street Bob?


Sent from my iPhone using Tapatalk

[Unbalanced]

BAV the cams would work in her bike, but would require tuner, and tune at a minimum.

To use the cylinders and Pistons you would need to cut the cases to fit the larger bore.   Might not be worth the cost just for cams.   If you did do the cams you might consider a few other things like heads, exhaust, air cleaner.  If you went this route you would most likely not want to use the 255's cams and look towards something 24d or other comparable cam.

[Bav]

BAV the cams would work in her bike, but would require tuner, and tune at a minimum.

To use the cylinders and Pistons you would need to cut the cases to fit the larger bore.   Might not be worth the cost just for cams.   If you did do the cams you might consider a few other things like heads, exhaust, air cleaner.  If you went this route you would most likely not want to use the 255's cams and look towards something 24d or other comparable cam.

Thanks for the info. Much appreciated.


Sent from my iPad using Tapatalk

[FAST380]

I've tried looking through this thread, I thought I saw this listed, but can't find it.

Looking for the part number for the 117 cylinders only in granite for a 2011 CVO. Can anybody help a brother out with the part number?

Thanks,

[mickey6756]

From the instruction sheet, the part number for the granite cylinder assembly is 16800128. This number covers the pair.

[FAST380]

That is them, thanks.

[HD Street Performance]

16800128 is each per cylinder I believe

[FAST380]

 Well that is less desirable, so a little over $400 per cylinder.

[Bav]

Isn't it 92500051 for the piston and cylinder kit?

Sorry just re read your post and you said you only want the cylinders.


Sent from my iPad using Tapatalk

[HD Street Performance]

Yep 92500051
Much better deal 

[barrhill]

here is my 117 numbers

[YELLOWBIRD]

here is my 117 numbers

Very Nice!

 



YB

[MrSurly]

Very Nice!

 



YB

Verra Noice

I guess I'm going to have to step it up to those cylinders. My 113 build is so yesterday(!)


Sent from my iPhone using Tapatalk

[BADRDE]

here is my 117 numbers

What pistons you use? and you stay with the 259 cam, or is that a woods 999? nice numbers, I am about to install my kit. Went with Mahle pistons at 10.7 :1 and a .030"cometic. Should push me to 11:1. You have any head work done?

[MrSurly]

Maybe someone here can clear this up. My googling so far finds that part no. shown on different sites as "1cyl, no description" while the sheet shown here indicates it's for both