I am trying to find a location for the module of my Gerbing heating system. It seems quite large for the space under the seat. The problem is that it needs to go just about where the forward part of the battery is located so the wiring is long enough to extend under the tank to the handlebar area for my dual controls. And to have the 2 hookups exit just above the coil for easy access for hooking up. The issue is the antenna module is attached there now just forward of the battery on a sliding sort of attachment. My plan is to detach it, remove one wire-tye, and reposition it back behind the battery around the fuse area. That should just barely give me room to squeeze in the Gerbing heating module in that space. Does anybody have a viable idea why it wouldn't work to reposition the antenna? Would it have an adverse affect on the security system, sensitivity, etc? Don't really want to cut the plastic under the seat to make room that way, unless realllllly necessary, which it isn't. My last bike was my learner bike, and this time I'm not doing some of those stupid things one does on their first bikes.......... yet! ha!