Custom Vehicle Discussions > CVO™ Breakout™

Help please for USA domestic wiring for rear lights and tail lamps

<< < (2/2)

Tractor Bubba:
Congratulations on getting it sorted out!
Good luck on your project.

2014CVO:
Cheers Tractor Bubba. All installed except need pins to do final connections under the seat and install Custom Dynamics rear light inserts. Then off to the dealer to get BCM  changed back to USA settings. Looking forward to seeing how the rear run/brake lights look which are stuck to the underside of the fender. :drummer:

2014CVO:
Wiring ready to go. Custom dynamic lights installed. Just waiting for deutsch connector pins to arrive. Thankfully I made some space under the seat, otherwise the CD stuff would not be able to fit. You would think they could make the controller smaller and tidy up the wiring so it’s not so bulky. Had to separate the wiring too so that it could go to left and right hand side of bike.

2014CVO:
Big difference between polishing and not polishing.

2014CVO:
Both front and rear lights converted from HDI to USA domestic and Custom Dynamics LED inserts and LED brake turn strip installed, working great and looking beautiful. Did not need to change or reset the BCM either.  :orange:

Navigation

[0] Message Index

[*] Previous page