CVO Technical > Twin Cam
110 lifters
Joel:
I have a 2015 Limited and replaced the lifters a couple years ago with Fueling brand.
I had around 22,000 miles on the bike and did it as maintenance service along with the cam bearings.
The original were working OK but the replacement lifters have been great, very quiet even after the bike has been ignored for a week.
I did a post on the cam Bearing Tools . https://www.cvoharley.com/smf/index.php?topic=125267.0
Boatman:
When replacing the lifters I highly recommend installing “Rocker Lockers” as well. My 2014 was quiet with no tick. My original lifters made it to 17,000 miles before needle bearing failure. I used S&S lifters. Took gas tank and rockers off. No adjustable pushrods for me. Good luck.
r0de_runr:
I remember reading about Gaterman problems. I've use CompCams 850 with success, and Larry's.
A I generated:
When choosing lifters, the debate often comes down to S&S, Feuling, and sometimes WFO Larry.
S&S Cycle: S&S has a long-standing reputation for quality and reliability. Many mechanics and riders consider S&S lifters to be the gold standard for a performance or even a stock replacement. They are a well-established company with a proven track record.
Feuling: Feuling is known for its high-performance, race-oriented parts, and their lifters are no exception. They are popular for builds with aggressive cams and high RPMs. Feuling also offers "short travel" lifters, which are designed to reduce valve train noise and increase stability at high RPMs.
WFO Larry: WFO Larry lifters are often seen as a more "boutique" or specialized option. They are highly regarded by those in the know, especially for custom or highly tuned engines. The advantage here is the direct expertise from an experienced engine builder. If you're working with a builder who recommends WFO Larry, it's a good sign they have faith in the product and its application to your specific build.
HD Street Performance:
It comes down to sources. Only a handful are left in the USA. Even the best "vendors" change "suppliers/manufacturers" based on supply chain issues or cost.
Johnson lifter company, USA, who supplies Feuling has the best quality in my opinion. Not to be confused with Johnson Hylift and Gaterman are not made in the USA.
fastfreddy:
witch johnson lifter has the axel oiling ? those are the ones i am using at the moment 30k on them and no issues so far
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version