www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All

Author Topic: Need help with Hardwiring Zumo  (Read 4745 times)

0 Members and 1 Guest are viewing this topic.

CHICO

  • Nothing on earth has given me more freedom than riding my bike
  • Newbie
  • *
  • Offline Offline
  • Posts: 23

    • CVO1: 2008 RKC - not an SE but maybe someday
Re: Need help with Hardwiring Zumo
« Reply #15 on: June 16, 2009, 11:01:36 AM »
This is where it came out and you can see that I routed it up - not under the tank but under the center console.
Logged
Ride safe, ride smart, ride long, ride hard.

CHICO

  • Nothing on earth has given me more freedom than riding my bike
  • Newbie
  • *
  • Offline Offline
  • Posts: 23

    • CVO1: 2008 RKC - not an SE but maybe someday
Re: Need help with Hardwiring Zumo
« Reply #16 on: June 16, 2009, 11:04:10 AM »
In the previous post, I tie wrapped (after the pics were taken) the wire so it is as hidden as possible and protected from getting cut when the bike is parked and handlebars are locked left.

In this pic, it shows where the line comes out at the bottom of the tank.
Logged
Ride safe, ride smart, ride long, ride hard.

Sean M Cary

  • Guest
Re: Need help with Hardwiring Zumo
« Reply #17 on: June 16, 2009, 11:04:29 AM »
Quote from: CHICO on June 16, 2009, 11:01:36 AM
This is where it came out and you can see that I routed it up - not under the tank but under the center console.

I went along the frame, under the tank the entire way - used a long wire tie as a puller and got it pretty much along the harness the entire way...but I had loosened up the tank to the extent that the fuel crossover would let me.
Logged

CHICO

  • Nothing on earth has given me more freedom than riding my bike
  • Newbie
  • *
  • Offline Offline
  • Posts: 23

    • CVO1: 2008 RKC - not an SE but maybe someday
Re: Need help with Hardwiring Zumo
« Reply #18 on: June 16, 2009, 11:07:10 AM »
This pic shows the Y-cable that is connected, the one female connector remains un-used.  The "cut" wires are the ones not controlled by the switch.  
Logged
Ride safe, ride smart, ride long, ride hard.

CHICO

  • Nothing on earth has given me more freedom than riding my bike
  • Newbie
  • *
  • Offline Offline
  • Posts: 23

    • CVO1: 2008 RKC - not an SE but maybe someday
Re: Need help with Hardwiring Zumo
« Reply #19 on: June 16, 2009, 11:09:02 AM »
All tucked away and and everything reconnected!!

Logged
Ride safe, ride smart, ride long, ride hard.

CHICO

  • Nothing on earth has given me more freedom than riding my bike
  • Newbie
  • *
  • Offline Offline
  • Posts: 23

    • CVO1: 2008 RKC - not an SE but maybe someday
Re: Need help with Hardwiring Zumo
« Reply #20 on: June 16, 2009, 11:10:06 AM »
I know this one is blurry - but this is the final confirmation that things worked!!!!

Logged
Ride safe, ride smart, ride long, ride hard.

CHICO

  • Nothing on earth has given me more freedom than riding my bike
  • Newbie
  • *
  • Offline Offline
  • Posts: 23

    • CVO1: 2008 RKC - not an SE but maybe someday
Re: Need help with Hardwiring Zumo
« Reply #21 on: June 16, 2009, 11:12:06 AM »
Quote from: UFO_HOG on June 16, 2009, 01:26:37 AM
2 Words.... Cigarette Lighter

It's 12 volts, low amped, fused, keyed on power, and most of all, easy to get to.

Where is that on my Road King?  Good to know for the future if I can get to it up front.

Logged
Ride safe, ride smart, ride long, ride hard.

Sean M Cary

  • Guest
Re: Need help with Hardwiring Zumo
« Reply #22 on: June 16, 2009, 11:14:30 AM »
Quote from: CHICO on June 16, 2009, 11:10:06 AM
I know this one is blurry - but this is the final confirmation that things worked!!!!



Gotta get a Tech Mount...the Chrome mount is really nice.
Logged

CHICO

  • Nothing on earth has given me more freedom than riding my bike
  • Newbie
  • *
  • Offline Offline
  • Posts: 23

    • CVO1: 2008 RKC - not an SE but maybe someday
Re: Need help with Hardwiring Zumo
« Reply #23 on: June 16, 2009, 11:15:35 AM »
Where do I get that?  I looked at that pic just now and thought the same thing...that just looks clunky.
Logged
Ride safe, ride smart, ride long, ride hard.

Sean M Cary

  • Guest
Re: Need help with Hardwiring Zumo
« Reply #24 on: June 16, 2009, 01:41:22 PM »
Logged

novazeus

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 120
Re: Need help with Hardwiring Zumo
« Reply #25 on: June 24, 2009, 04:15:40 AM »
Logged
Pages: 1 [2]  All
« previous next »
 

Page created in 0.129 seconds with 22 queries.