www.CVOHARLEY.com

Custom Vehicle Discussions => Screamin’ Eagle® Ultra Classic® Electra Glide® => Topic started by: electraglideclyde on September 30, 2018, 05:04:39 PM

Title: Looking for a part # for an '06 CUSE
Post by: electraglideclyde on September 30, 2018, 05:04:39 PM
When I removed the stock dual beam headlight to replace it with a LED, I also removed the wiring harness that splits the headlight connector to connect to the dual beam.  Now I can't find the splitter.  I've been to several HD shops and no one has a clue.  Anybody have a parts supplement for a 06 CUSE that can give me a part number for that wiring harness ?
Title: Re: Looking for a part # for an '06 CUSE
Post by: hd-dude on September 30, 2018, 05:10:34 PM
I have the book at the shop, I'll check tomorrow for you if nobody has it sooner.
Title: Re: Looking for a part # for an '06 CUSE
Post by: Fired00d on September 30, 2018, 05:55:45 PM
Have you tried looking for it on Ronnies OEM Parts Finder (http://partsfinder.onlinemicrofiche.com/ronnies/partsfinder.htm)? Not sure what part you're speaking of or I would try to find it for you.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: Looking for a part # for an '06 CUSE
Post by: Wrongway on September 30, 2018, 10:49:04 PM
 The way I read this is that you need the xtra harness they have for controlling the garage door opener. If not someone will find what you need.
Part number is 70174-06 for the complete harness.
Title: Re: Looking for a part # for an '06 CUSE
Post by: electraglideclyde on October 01, 2018, 08:38:15 AM
The way I read this is that you need the xtra harness they have for controlling the garage door opener. If not someone will find what you need.
Part number is 70174-06 for the complete harness.

 I believe #3 is the correct part.  WOW, $121.99 for a couple of connectors and some wire.  I guess I'll have to try and make one.
Thanks
Title: Re: Looking for a part # for an '06 CUSE
Post by: grc on October 01, 2018, 08:39:46 AM
There is another part number listed but not illustrated that may be just the smaller Y-harness to accommodate the dual bulbs.  See if your dealer can look this one up and see if it's what you need.  It's about $34, versus approximately $143 for the harness with the garage door opener connections.

70319-04  WIRING HARNESS HALOGEN BULB INTERCONNECT

Jerry
Title: Re: Looking for a part # for an '06 CUSE
Post by: electraglideclyde on October 01, 2018, 08:54:10 AM
Thanks Jerry.  I will try that one.
Title: Re: Looking for a part # for an '06 CUSE
Post by: Aussie on June 30, 2019, 11:12:18 PM
Has there been changes accessing Ronnies OEM Parts Finder?
I have been using it for some time and now the link takes me to a Dead End Page after I select the link to go to HD parts finder.


 
Title: Re: Looking for a part # for an '06 CUSE
Post by: Twolanerider on June 30, 2019, 11:58:13 PM
Go to a good local auto parts store.  Replacement pigtails for various different headlights will be a stocked item.  If they don't have a Y connector they'll have enough pieces you can make one.
Title: Re: Looking for a part # for an '06 CUSE
Post by: grc on July 01, 2019, 07:39:34 AM
Has there been changes accessing Ronnies OEM Parts Finder?
I have been using it for some time and now the link takes me to a Dead End Page after I select the link to go to HD parts finder.

This is the address I have set up in my shortcut for Ronnies, still works as of this am.  I have noticed in recent weeks the site is often slow to navigate.

http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc

Jerry
Title: Re: Looking for a part # for an '06 CUSE
Post by: Aussie on July 01, 2019, 06:50:01 PM
This is the address I have set up in my shortcut for Ronnies, still works as of this am.  I have noticed in recent weeks the site is often slow to navigate.

http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc

Jerry
This one works okay, thanks Jerry.