Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Keats]

What about the SE camplate? The SE Comp Sprocket? SE Forged Rocker Supports?

So all in all, about $3500-$4000. Add the above additional items for under a grand more.

Good luck with your build!!!

Hoist!

OK Howie, you are killing me......
what does the se camplate buy me?
SE comp sprocket?
and forged rockers, have not heard of many rocker failures though.

you are trying to spred your pain?

[Hoist!]

OK Howie, you are killing me......
what does the se camplate buy me?
SE comp sprocket?
and forged rockers, have not heard of many rocker failures though.

you are trying to spred your pain?

HeHe!!! Oh yeah, what about Roller Rockers too? Another $450!

There all just stronger, closer tolerance built parts. The camplate buys you billet instead of cast and has bronze bushings for the cams, instead of tolerance fit in the plate itself. SE Comp Sprocket will handle 7x more torque than stock and I'm convinced it's a good investment in these big in motors.

Hoist!

[Fired00d]

Jeff,
What Howie is saying is... "Pay now, or pay later... if it's apart do it all at once, do it right, and save $$$$"

 
Ride Safe,
Fired00d
 

[Keats]

Jeff,
What Howie is saying is... "Pay now, or pay later... if it's apart do it all at once, do it right, and save $$$$"

 
Ride Safe,
Fired00d
 

If I cannot get my arms around the build I will just abandon and tell them to fix and save my money for a Jims 131.
I probably can get a Jims build done and installed for about 9K and have someone else on the hook with problems.

If I follow my buddy Howie, I will have about 5-6k in it no warranty and a weak bottom end. add another 2K to beef up bottom end and I will have 7-8K in it
and be rebuilding anyway in another 13K miles?

not much of a stomach for that sequence.

[Fired00d]

If I cannot get my arms around the build I will just abandon and tell them to fix and save my money for a Jims 131.
I probably can get a Jims build done and installed for about 9K and have someone else on the hook with problems.

If I follow my buddy Howie, I will have about 5-6k in it no warranty and a weak bottom end. add another 2K to beef up bottom end and I will have 7-8K in it
and be rebuilding anyway in another 13K miles?

not much of a stomach for that sequence.

You may have answered your own question.

I've always been told do it right the first time or don't do it at all.

 
Ride Safe,
Fired00d
 

[Keats]

You may have answered your own question.

I've always been told do it right the first time or don't do it at all.

 
Ride Safe,
Fired00d
 

Not doing the build completely right the first time is not what really scares me, (I can always blame myself on that one).

What really scares me is doing the build the right way the first time and ending in the same spot!

[sportygordy]

If I cannot get my arms around the build I will just abandon and tell them to fix and save my money for a Jims 131.
I probably can get a Jims build done and installed for about 9K and have someone else on the hook with problems.

If I follow my buddy Howie, I will have about 5-6k in it no warranty and a weak bottom end. add another 2K to beef up bottom end and I will have 7-8K in it
and be rebuilding anyway in another 13K miles?

not much of a stomach for that sequence.

Buy your Jim's from Jenni at Tri-County and plop in yourself... Piece of cake.. I'll even send you a free base map that runs real decent.

[Admiral]

Cheaper than buying a new bike.

 

[DCFIREMANN]

Subtlety is not required when you have more than two bikes that run!
Right AJ?

 

I think I qualify for that!!!!!!

Be Safe

THE DAWG

[Hoist!]

I think I qualify for that!!!!!!

Be Safe

THE DAWG

HeHe!!! Even I do........................

























Sometimes!!!

Hoist!

[DCFIREMANN]

Don't rework the heads. If you think you don't want to spend the money on something that will give you problems down the road (AKA 110) Go with a set of cams lifters and pushrods and you will be loving life. Save you money for the Jims motor down the road. You will have a bike that will run good but not good enough to hurt the bottom end!!!!!

Be Safe

THE DAWG

[DCFIREMANN]

AJ
    Sarcasm requires a degree of sublety.

DC's about as subtle as a sledgehammer 

B B

Considering the source I will let this one slide!!!!! This is your one time get out of jail free card!!!!!

HAPPY NEW YEAR!!!!!!

Be Safe

THE DAWG

[SPIDERMAN]

Considering the source I will let this one slide!!!!! This is your one time get out of jail free card!!!!!

HAPPY NEW YEAR!!!!!!

Be Safe

THE DAWG

You must be bored. You had to read back 19 posts to even find it.

You've heard worse in your years in the firehouse.

Speaking of which, you're a fireman, how could you put me in jail anyway ?

Happy New Year DAWG 

B B

[DCFIREMANN]

You must be bored. You had to read back 19 posts to even find it.

You've heard worse in your years in the firehouse.

Speaking of which, you're a fireman, how could you put me in jail anyway ?

Happy New Year DAWG 

B B

You know BB some of us Fireman have guns and police powers!!!!! That is what happens when you go into Investigations and you are forced to work with the fine members of the ATF!!!

BORED??? Surely you jest. I am still having fun at the expense of others!!!!!

I hope everyone had a great New Years!!!! I just hope 2009 is better than 2008!

Be Safe

THE DAWG

[Fired00d]

You know BB some of us Fireman have guns and police powers!!!!! That is what happens when you go into Investigations and you are forced to work with the fine members of the ATF!!!

BORED??? Surely you jest. I am still having fun at the expense of others!!!!!

I hope everyone had a great New Years!!!! I just hope 2009 is better than 2008!

Be Safe

THE DAWG

True dat.

 
Ride Safe,
Fired00d