www.CVOHARLEY.com
Custom Vehicle Discussions => Screamin' EagleĀ® Road KingĀ® => Topic started by: BluesRunner on July 19, 2014, 10:38:23 AM
-
I'm gonna swap out the stock bars for some apes hopefully this winter. Looking for pics of different brands and heights. Add the brand, height and if new clutch and brake hoses were needed. Thanks BR
-
13" cyclesmiths. Extended clutch, brake line, and wires.
-
Another
-
WildOne Chubby WO515 10" mini-apes. Only had to extend the wires. You need to purchase the riser adapter too.
-
Wild1 "Baby Apes." If remember correctly it's +2 on all the cables. Wiring was fine though.
-
13" cyclesmiths. Extended clutch, brake line, and wires.
Another
Looks like a Street Glide with apes to me. :nixweiss:
-
I went with 12-1/2" Wild 1's. New cables, hoses and riser. Wild 1 has some nice clamps for the cables and hoses.
-
Disregard my posts. I use tapatalk at work and you can't see the subject just the topic. I had no idea it was a Road King thread. :nixweiss:
-
My 2013 CVO King
14 OEM Monkey Bars by Paul Yaffee.
Extended brake line, clutch and wires.
Internally wired GPS to Sound system for directions and music
13 CVO Ultra Heated grips, same as kings stock but heated instead.
Arlen Ness Mirrors
(http://www.cvoharley.com/smf/gallery/6353_12_04_14_8_23_01.jpeg)
(http://www.cvoharley.com/smf/gallery/6353_12_04_14_8_26_10.jpeg)
(http://www.cvoharley.com/smf/gallery/6353_12_04_14_8_28_09.jpeg)
-
Disregard my posts. I use tapatalk at work and you can't see the subject just the topic. I had no idea it was a Road King thread. :nixweiss:
Its all good. Your bike looks great. I kinda wish I had got that bike instead of the Road king
-
Its all good. Your bike looks great. I kinda wish I had got that bike instead of the Road king
Say it ain't so B R :nixweiss:
-
I didn't want the weight of the fairing on the forks. However I miss having two speakers directly in front of me. The windscreen works ok for me but the looks leave a bit to be desired. Its definitely different. I may trade some day in the future but CVO prices are pretty steep. Its nice having a CVO.
-
:drummer:
-
10" Wild Ones on my 2008 SERK. Existing brake and clutch fluid lines worked fine. Bought new TBW from HD. 8" wire extensions. Solder like a surgeon.
Love Road Kings!
-
13 inch carlini flyin apes
-
2013 SERK #645 of 900
Installed WO572 14" apes this weekend.
-
Looks nice Hubbz
-
Just installed...
Wild ones 10" apes with Harley LED mirrors...
-
Other pictures. Mirrors are great as well. Good viewing surface.
-
Last picture...
-
Forgot to mention:
No changes on clutch or brake lines but wires extended (soldering involved).
Again, these are Wild ones 10" mini apes. Such an improvement on my wrists...
-
'07 SERK3 12 1/2"
-
Wild One 14" Chubby's
-
See pictures of my 16" BR's Bent Ape Beaters. Good quality bar and completely change the whole feel of the bike for the better. Long lead time but well worth the wait IMO 8)
-
2nd one
-
Last 1
-
:drummer:
Can you share the details as far as size and manufacturer? Do you happen to have any more pics?
Thanks
-
Africa al, does the stock windshield still fit with those bars? They look great on your bike. :2vrolijk_21:
-
BR Custom Open Bars 14" Love them!!!
-
Another pic
-
Looks good Hek, do they interfere with the stock windshield?
-
Thanks! And, no, no interference at all. I like to have the windshield option in case of long trips.
-
(http://i1239.photobucket.com/albums/ff505/Digital1976/61065BAA-396C-4D11-97F7-F2FA54ACE845_zpsdtinwcvz.jpg) (http://s1239.photobucket.com/user/Digital1976/media/61065BAA-396C-4D11-97F7-F2FA54ACE845_zpsdtinwcvz.jpg.html)
-
Absolutely Beautiful!
-
On top of the alpes
-
10 inch Yaffe oem monkeys
-
One more
-
Got the King out today
-
One more pic
-
2013 SERK #645 of 900
Installed WO572 14" apes this weekend.
Your pic is the inspiration for next mod. Going with the Wild 1 Chubby 14"s on my 13 SERK.
-
14" Vindikta Bars
-
www.wild1inc.com/580Bx.html
You can see here my cvo rk 2014 with the new Reaper from wild 1 !
-
Tiger, good looking. :2vrolijk_21:
-
18" Carlini's
-
Specifically for the 2014 CVO RK, are the stock bars 1 1/4" all the way through the clamping area or do they step down to 1" at the clamp?
-
The 2014 stock bars are 1.25" all the way so you other have to buy bars that are 1.25" at the riser or buy a 2013 riser kit and yaffie doesn't make them 1.25 all the way for are bikes apperently so you have to change the riser I may see if br apes can make them 1.25 for the 2014 instead of changing the riser
-
The 2014 stock bars are 1.25" all the way so you other have to buy bars that are 1.25" at the riser or buy a 2013 riser kit and yaffie doesn't make them 1.25 all the way for are bikes apperently so you have to change the riser I may see if br apes can make them 1.25 for the 2014 instead of changing the riser
Thanks for that info as this is what I thought. BR Customs will do a bar that is 1 1/4 all the way through the mounting area which is the route I will be going once I commit to a design I want.
-
I fill in with my BRs 16" sweeping beaters once I get them. 1,25 was no problem for BR. Downside it takes forever to get them...but I'll hope once installed everything will be fine.
-
Just installed 16 in Vindikta Avengers, had to do extended brake and clutch lines along with the wiring, did not have to extend TBW wiring. Only took 2 weeks to get the bars, and ordered the lines through HDBikeParts.com.
-
Another pic
-
Another pic
looks awesome!!
-
Here's my 2013 SERK with Wild Ones Chubby 14" bars. Ended up having a shop do the modification. No regrets! Tight fit for internal wiring. Very comfortable and looking forward to some long days in the saddle soon! Thanks Hubbz for the inspiration!!!
-
Here's my 2013 SERK with Wild Ones Chubby 14" bars. Ended up having a shop do the modification. No regrets! Tight fit for internal wiring. Very comfortable and looking forward to some long days in the saddle soon! Thanks Hubbz for the inspiration!!!
Looks awesome! Do you have any more pics? Can you share how much additional length is required on the clutch and brake cables? Do the apes work with the stock windshield? Thanks!
-
(http://uploads.tapatalk-cdn.com/20160517/1ebc230e25322fc11da34685bb123d93.jpg)
Sent from my iPhone using Tapatalk
-
Looks awesome! Do you have any more pics? Can you share how much additional length is required on the clutch and brake cables? Do the apes work with the stock windshield? Thanks!
I had purchased the parts after talking to the guy at http://www.hdbikeparts.com/ . I don't remember the guys name but he was very familiar with all aspects of this modification and was excellent to deal with. I had intentions of doing the mod with a buddy but became concerned about the internal wiring challenges. So I had a custom shop down in Fort Collins, CO do it for me. (Sangers Cycles). Glad I did because the shop ended up not using the aftermarket wiring harness since all the splice points were at the same length causing too big a clump so he just fabbed a harness with staggered connection points.
The stock windshield does fit with no problem though I only use it on extended rides, like next month's Pacific Coast Highway ride.
-
18" on black '06; 16" on '08 CVO, wish I had gone with 18 on the CVO
-
I've been looking at the wild1 12" and 14". I read they have 12" pull back (on the 12.5" rise) and 12.5" pull back (on the 14" rise). That seems like quite a bit, almost like the handlebar ends would be facing at you, but seems to look good from the photos. You guys like the feel of those bars?
One thing that seems nice about that long pull back is that you can angle the bars straight up which looks nice, instead of angling them down to try and get more reach.
-
16" vindikta bars on my 14.
-
14's on my '14.
Sent from my KFAPWI using Tapatalk
-
16" Factory 47
-
Lookin good there Pete.
-
Mine is currently getting wild1 12.5" bars put on. Can't wait to get it back!
-
Here's my 13 with 16" Carlini Menace
(http://i1242.photobucket.com/albums/gg521/pudgeyxj/D988DABE-59C1-46D8-B136-FA4D6EBF9986.jpg) (http://s1242.photobucket.com/user/pudgeyxj/media/D988DABE-59C1-46D8-B136-FA4D6EBF9986.jpg.html)
-
Here's my 13 with 16" Carlini Menace
(http://i1242.photobucket.com/albums/gg521/pudgeyxj/D988DABE-59C1-46D8-B136-FA4D6EBF9986.jpg) (http://s1242.photobucket.com/user/pudgeyxj/media/D988DABE-59C1-46D8-B136-FA4D6EBF9986.jpg.html)
Looks Great :2vrolijk_21:
I'm a raving fan of the 13 & 14 "Cee Vee O" Kings
-
(https://uploads.tapatalk-cdn.com/20170217/0179d4e879ac7edd7c74baae380ec7d2.jpg)
16" Carlini Gangster Apes
Sent from my iPhone using Tapatalk
-
Both Look GREAT! :2vrolijk_21: I have carlini Evil apes 16" I Love them!
-
12" Wild 1 Chubby
-
12.5" Wild1 Chubby's. Just got my horn cover painted to match the bike, and some matching paint on the breather cover to break up the chrome a little. Next is red screens in the heat shields (ceramic coating).
(https://s12.postimg.org/v3jz9bkd9/bike1.jpg)
(https://s18.postimg.org/7ux9hm1yh/bike2.jpg)
(https://s1.postimg.org/r2c8iai2n/hrn1.jpg)
-
Nice RK for sure. Where did you get the derby cover?
-
12.5" Wild1 Chubby's. Just got my horn cover painted to match the bike, and some matching paint on the breather cover to break up the chrome a little. Next is red screens in the heat shields (ceramic coating).
(https://s12.postimg.org/v3jz9bkd9/bike1.jpg)
(https://s18.postimg.org/7ux9hm1yh/bike2.jpg)
(https://s1.postimg.org/r2c8iai2n/hrn1.jpg)
Apes look bad @ss! I am going to put the same apes in black on my 14 CVO Road King. Can you tell me what size cables you had to go with? Any other info on parts you needed? Thanks!
-
Scott,
Suggestion.... when you have the heatshield screens color matched, have the screens on front brake calipers color matched too.... your bike looks great :2vrolijk_21:
12.5" Wild1 Chubby's. Just got my horn cover painted to match the bike, and some matching paint on the breather cover to break up the chrome a little. Next is red screens in the heat shields (ceramic coating).
(https://s12.postimg.org/v3jz9bkd9/bike1.jpg)
(https://s18.postimg.org/7ux9hm1yh/bike2.jpg)
(https://s1.postimg.org/r2c8iai2n/hrn1.jpg)
-
Scott,
Suggestion.... when you have the heatshield screens color matched, have the screens on front brake calipers color matched too.... your bike looks great :2vrolijk_21:
Great idea, thank you! I will in fact do that. 8)
Apes look bad @ss! I am going to put the same apes in black on my 14 CVO Road King. Can you tell me what size cables you had to go with? Any other info on parts you needed? Thanks!
I am trying to scroll through and find the website. I basically told the guy my bike and handlebar size and he sent what I needed. When I find it, I will send ya a PM! The only other thing you should need is the adapter from wild1 to accept 1" bars at the risers. It's around 50 bucks I think.
-
Great idea, thank you! I will in fact do that. 8)
:2vrolijk_21: :drummer:
-
What kind of seat is that? Looks comfy
Paul
-
It's the mustang wide tripper solo. I really like it. Still low profile but nice support on trips. I ride 15k/year and it works great.
-
16" Carlini Gangster Apes.
-
Very nice, I really like the blacked out look!!
Cheers :drink:
Paul
-
14" wild one chubbys
-
16" Carlini Evil Apes.
The more I see these bars, the more I love em'. They look great on Kings!
-
14's on a '14 .....
(http://i1281.photobucket.com/albums/a518/cmcarr88/12985597_10201562758067329_2444097443286872306_n_zpsgn8z2c4a.jpg) (http://s1281.photobucket.com/user/cmcarr88/media/12985597_10201562758067329_2444097443286872306_n_zpsgn8z2c4a.jpg.html)
-
Just pulled off the Carlini 16's from 5 posts up and went with the DNA 1.5" Monster bars. They reduced down to 1" in the clamping area.
-
Another angle
-
Last angle
-
55800440 Road Glide Chizeled Handlebar
-
(https://uploads.tapatalk-cdn.com/20170721/c3f93b54fbb4ff4b17f9ddcd8b08eb0c.jpg)
18" Carlini's
Sent from my iPhone using Tapatalk
-
This bar that put it on nonsteeped or stepped ?