Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: CVO 117 build with Fullsac DX and his new mufflers  (Read 1601 times)

0 Members and 1 Guest are viewing this topic.

GMR-PERFORMANCE

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1769
    • TX

CVO 117 build with Fullsac DX and his new mufflers
« on: March 01, 2017, 09:06:16 AM »

Not like the 117 kit is new or that we have not built countless kits at this point. However I was able to install the FS DX head pipe and his new complete muffler. these have the 2.0 core. Great sound nice rumble not as loud as the cursher mellows , ( i like that ) but twist the throttle and they sound great .

Build wise the specs are on the sheet. I had a touch of slip down low but the customer wanted me to back off on spring rate .. Not like he is going to be doing 2000 RPM pulls . Some noise in the sheet it was due for tires they where chopped badly .. Overall the Alberta boys are happy campers . ( we built two of these )


 More tq than we have seen before with a great curve .   Hats off to you Steve outstanding job on the mufflers

CVO 117 by GMR Performance, on Flickr
« Last Edit: March 01, 2017, 09:08:07 AM by GMR-PERFORMANCE »
Logged
2012 SHARK  S&S 124 150/140   www.gmrperformance.com

Snakepit

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 82
    • ON


    • CVO1: 2015 CVO Limited
Re: CVO 117 build with Fullsac DX and his new mufflers
« Reply #1 on: March 01, 2017, 09:40:12 AM »

beauty! What compression at?
Logged
1973 Norton Commando
2015 CVO Limited

ultrarider123

  • Guest
Re: CVO 117 build with Fullsac DX and his new mufflers
« Reply #2 on: March 01, 2017, 09:48:36 AM »

Steve, that 117 build looks great.  Usable power all across the scale.  I was really looking at your 113 (based on the results Joevibe received on his build) but this 117 looks dang good, too.  Decisions, decisions....
Logged

Scott7d

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 453
  • 2020 CVO Road Glide 117"
    • IN


    • CVO1: 2020 CVO Road Glide 117"
Re: CVO 117 build with Fullsac DX and his new mufflers
« Reply #3 on: March 01, 2017, 10:08:02 AM »

You could either pull a horse trailer, or throw wings on it and take flight. Very nice!!
Logged
Scott Matlock
Iron Butt Ride List

rockytop117

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 101
  • www.CVOHARLEY.com
    • TN

Re: CVO 117 build with Fullsac DX and his new mufflers
« Reply #4 on: March 01, 2017, 02:32:36 PM »

Stock heads?
Logged
11 SERG.
117ci
570G S&S
RB RACING 2-1
SE 58MM TB
HPI INJECTORS
WFO LARRY HEADS
COMP 10:2 CCP 190
DIRECT LINK TUNE BY STROKERJLK
SAE128.09/STD131.32 HP  TQ135.89 std 139.31
RC COMPONENTS WHEELS & A/C
VPC 92 CLUTCH
FOSGATE AMP, FOCAL SPEAKERS

JoeVibe

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1507
    • TN


    • CVO1: 2022 CVO Road Glide Limited
    • CVO2: 2014 Titanium/Black FLHRSE6
Re: CVO 117 build with Fullsac DX and his new mufflers
« Reply #5 on: March 01, 2017, 04:10:02 PM »

Steve, that 117 build looks great.  Usable power all across the scale.  I was really looking at your 113 (based on the results Joevibe received on his build) but this 117 looks dang good, too.  Decisions, decisions....

Go for it Haird! The 113 is fun but the 117 is funner!
Logged

BADRDE

  • Newbie
  • *
  • Offline Offline
  • Posts: 26
  • www.CVOHARLEY.com
    • MO


    • CVO1: 2011 FLHTCUSE6 CVO
Re: CVO 117 build with Fullsac DX and his new mufflers
« Reply #6 on: March 01, 2017, 08:09:22 PM »

Nice Numbers Steve, I have to say those are what I am looking for once I do my intake valve and port my heads, also install your 600 cam. I just got my 117 done today. used the whole kit except pistons, went with 10.7:1 from Suburban speed.  End up with 121/130 with the 259e and Xtreme True Duals. Love the sound and what a difference over that 110.
Logged
 

Page created in 0.135 seconds with 25 queries.