www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Screaming Eagle 50MM EFI  (Read 1439 times)

0 Members and 1 Guest are viewing this topic.

mbegalla

  • Newbie
  • *
  • Offline Offline
  • Posts: 18
  • FLHRSEI.ORG
Screaming Eagle 50MM EFI
« on: December 25, 2006, 11:37:42 PM »
Any members ever run a SE 50mm EFI on a relatively stock motor(no internal changes)only pipes, air cleaner and PC III ? what where the results?...would it perform better/worse?..any comments would be appreciated
Logged
MBEGALLA
Rinehart True Duals with thunder Monster Baffles
Zippers Redshift 575 cam(gear driven)Feuling, all the way
Doherty Power Pak with powervents
Dyno @ 108 HP & 115 TQ ....FUN!! custom MAP on Dyno

WideOpen

  • Newbie
  • *
  • Offline Offline
  • Posts: 19
  • FLHRSEI.ORG
Re: Screaming Eagle 50MM EFI
« Reply #1 on: January 01, 2007, 09:57:42 AM »
I don't know the answer to this but I'm going to bump it up because I'm curious to see if anyone can answer. I was at a dealer Saturday who carries the Thunder Mountain Customs and was admiring a new Keystone. Salesman told me all someone needed to add to it was some good pipes and the 50mm EFI. I did some homework and if I'm not mistaken, a stock SE 110 comes with a 46mm EFI. Is that correct?

By the way, even though I liked the Keystone, at $49,000 they will have to sell it to someone else. :o
Logged
 

Page created in 0.116 seconds with 21 queries.