www.CVOHARLEY.com

CVO Technical => Wheels/Tires/Suspension/Brakes => Topic started by: laylonlor on October 16, 2017, 09:10:25 PM

Title: torque spec.
Post by: laylonlor on October 16, 2017, 09:10:25 PM

what do ya torque front axel nut on 2010 street glide , and the two pinch nuts , thanks

Title: Re: torque spec.
Post by: BillH on October 16, 2017, 10:57:30 PM

Front axle is 60-65 ft lbs, If you mean the front fork pinch bolts, they are 30-35 ft lbs. The front axle holder nuts are 132-180 inch lbs

Title: Re: torque spec.
Post by: Twolanerider on October 16, 2017, 11:18:07 PM

If you're asking about the two nuts on the axle cap they are not even close to 35 ft pds or more.  The spec for those is 132-180 INCH POUNDS.  That would be 11-15 ft pds.  Try to pull 35 ft pds of torque on those little 5/16 bolts and you'll ruin parts.

Title: Re: torque spec.
Post by: laylonlor on October 17, 2017, 01:59:13 PM

varies a lot , i guess

Title: Re: torque spec.
Post by: Yellow09SERG on October 17, 2017, 07:27:37 PM

Quote from: laylonlor on October 17, 2017, 01:59:13 PM

varies a lot , i guess

Think this is what your looking for.

Title: Re: torque spec.
Post by: laylonlor on October 17, 2017, 09:07:33 PM

i put 75 and 22  ft. lbs ,

Title: Re: torque spec.
Post by: laylonlor on October 17, 2017, 09:08:29 PM

didn't do what (yellow 09) said though