www.CVOHARLEY.com
CVO Technical => Twin Cam => Topic started by: bakon on December 01, 2017, 08:59:01 PM
-
What's your opinions on rocker lockers? So far I don't see a down side even if not making noise. Any thoughts?
-
May not fix everyone’s noise but they are inexpensive and won’t hurt anything and have helped many. I installed them this summer when replacing lifters.
-
they worked for me.
-
May not fix everyone’s noise but they are inexpensive and won’t hurt anything and have helped many. I installed them this summer when replacing lifters.
x2 :2vrolijk_21:
-
I just got a set, don’t know if I should put them in now or wait until my warranty expires next August?
Sent from my iPhone using Tapatalk
-
These can't hurt anything and helps correct an obvious design flaw. Will not void warranty.
-
good product
-
I am using them on every build just as insurance. can't hurt
-
Do they help protect engine or do they just help stop rattle?
-
Just reduces valve train noise.
-
Just reduces valve train noise.
I guess with less noise it may allow you to hear any new noises if or when they occur.
-
Installing some on my 13 Ultra this winter while I install my new exhaust.
-
Where can I get these????
-
Amazon
Sent from my iPad using Tapatalk
-
Will be putting these in. Just got them
-
Can they be done without completely removing the rocker plate? Seems you could just pull the covers, roll it around to the base circle on the cam and do one at a time re-torqueing should pull it in. Am I missing something?
-
Can they be done without completely removing the rocker plate? Seems you could just pull the covers, roll it around to the base circle on the cam and do one at a time re-torqueing should pull it in. Am I missing something?
Yes you can, here is a procedure from HD forums
https://www.hdforums.com/forum/new-rushmore-models/1058869-the-tapping-the-quest-is-over-22.html
Sent from my iPhone using Tapatalk