www.CVOHARLEY.com

CVO Technical => Electronic Toys and Gadgets => Topic started by: efrbc1 on September 14, 2018, 07:35:17 PM

Title: SEEG Accessory Wiring
Post by: efrbc1 on September 14, 2018, 07:35:17 PM

2005 SEEG.  For the accessory switch on the dash, where is the wire/plug located that is controlled by this switch?

Thanks.

Title: Re: SEEG Accessory Wiring
Post by: SIKBIRD on September 14, 2018, 08:32:53 PM

It’s under the seat (in front of the battery) it has a rubber plug in it...you’ll need duetch (sp?) connector. I have mine connected to my gps.

Title: Re: SEEG Accessory Wiring
Post by: SIKBIRD on September 14, 2018, 08:44:56 PM

Pic

Title: Re: SEEG Accessory Wiring
Post by: SIKBIRD on September 14, 2018, 08:45:40 PM

Without plug

Title: Re: SEEG Accessory Wiring
Post by: efrbc1 on September 19, 2018, 10:15:56 AM

Thanks!

Title: Re: SEEG Accessory Wiring
Post by: efrbc1 on September 29, 2018, 08:09:21 AM

So, another question.  Found the plug and I assumed that the accessory switch on the dash "powered" the accessory plug.  Bought the adaptor plugged it in and no power to the adaptor.  Checked the wiring and it was incorrect.  Changed the wiring (in the plug) and now have constant power to the adaptor.  It seems the accessory switch (on the dash) has no control over the accessory plug despite how it is wired.  Either no power at all on constant "on".

Thinking about just wiring directly into the accessory switch on the dash.  Ideas?? 

Title: Re: SEEG Accessory Wiring
Post by: SIKBIRD on September 29, 2018, 08:43:17 AM

It’s been a while but if I remember correctly, there are 3 wires (or contacts) in that plug. One is constant power, one is switched power, one is a ground.  Get a multimeter and have someone toggle that switch on the dash while you probe the contacts to figure out which one is switched power

Title: Re: SEEG Accessory Wiring
Post by: SIKBIRD on September 29, 2018, 08:47:43 AM

Now that I think about it, there may be 4 wires: constant power, switched power and a ground for each...also, don’t forget to check the fuse for that plug

Title: Re: SEEG Accessory Wiring
Post by: efrbc1 on September 29, 2018, 11:29:20 AM

4 wires.  One black (ground) and three others.  Tried all three and could not find one that worked with the dash mounted switch.  The only one that had power had it all the time regardless of the dash switch.   :-\

Title: Re: SEEG Accessory Wiring
Post by: SIKBIRD on September 29, 2018, 12:21:21 PM

Hmmm, wonder if the wire is cut? 

Title: Re: SEEG Accessory Wiring
Post by: efrbc1 on September 29, 2018, 02:49:17 PM

Possible but not probable.  Accessory tap is new and has continuity.  Using an '03 manual (wiring diagram) for an '05.  Wires are different colors so it will be hard to trace back.  Gonna look at wiring directly to the switch in the dash.  That's where I will need the power anyway.

Title: Re: SEEG Accessory Wiring
Post by: hd-dude on September 29, 2018, 05:22:10 PM

The plug has four wires. If my memory is correct...... Running lights (blue), brake lights (red), ground (black), and switched acc (orange)power form the dash switch.

Title: Re: SEEG Accessory Wiring
Post by: efrbc1 on September 29, 2018, 07:30:52 PM

Thanks.  Not at home now but those colors don't sound familiar.  I'll take a look tomorrow and give it one more try.