Topic: Floorboard relocate (Read 7762 times)

us1fountain · « **on:** October 21, 2016, 08:06:02 PM »

Anyone have the relocate kits to move the riders floorboards outwards only? Not wanting them forward any. Ran across some that fit 16' CVO SG, just not sure if they fit the '17's. Is it just the CVO's that have different floorboard frame mounts, or all redesigned for '17? My feet always feel like they are on the edge and have slipped off when hitting a bump.

Thanks

ultrafxr · « **Reply #1 on:** October 22, 2016, 09:11:07 AM »

I had the extension kit from VtwinGoodies (formerely HarleyGoodies) on my 2012 CVO Ultra. Took them off when I traded for my 2017 CVO Limited and they fit it just fine. Don't know who manufactured those you refer to but if they fit the 2016 CVO SG I think they will probably fit your 2017.

us1fountain · « **Reply #2 on:** October 22, 2016, 12:06:49 PM »

Don't recall brand off hand. They were a solid oval shaped spacer with dowel pin.

Thanks

Wrongway · « **Reply #3 on:** October 23, 2016, 08:47:16 AM »

This is who I used on a couple of my bikes.

http://www.bakercustominc.com/index.php

egultrac · « **Reply #4 on:** October 24, 2016, 10:29:51 AM »

http://vtwingoodies.com/pages/driver.html

monza66mo · « **Reply #5 on:** October 28, 2016, 09:33:33 AM »

http://www.thepropad.com/floorboard-extension-kits/

This is what I used on my last couple of bikes. I just ordered a new set today for my new SESG.

MadCVORG · « **Reply #6 on:** October 31, 2016, 01:46:27 PM »

Just installed these on my RG. They work great, and have a nice finish.

us1fountain · « **Reply #7 on:** October 31, 2016, 10:57:47 PM »

Thanks for the replies. Ordered the Vtwingoodies.

Harley Guy · « **Reply #8 on:** November 01, 2016, 10:53:27 AM »

Quote from: us1fountain on October 31, 2016, 10:57:47 PM

Thanks for the replies. Ordered the Vtwingoodies.

I had these on my 2009 and now have them on my 2015 - good product, adds leg comfort..

D-N-D · « **Reply #9 on:** November 01, 2016, 11:11:28 AM »

Are these vtwingoodies an easy install ??

Thanks
Dante

Harley Guy · « **Reply #10 on:** November 01, 2016, 07:27:00 PM »

Quote from: D-N-D on November 01, 2016, 11:11:28 AM

Are these vtwingoodies an easy install ??

Thanks
Dante

Yes

D-N-D · « **Reply #11 on:** November 02, 2016, 05:39:58 AM »

Harley Guy , Thank you !!!

Dante

us1fountain · « **Reply #12 on:** November 03, 2016, 10:07:21 PM »

Received the extensions tonight and installed them. So much better. Feet are no longer resting on the edge of the floorboards awaiting for that bump in the rod to slip off.

D-N-D · « **Reply #13 on:** November 04, 2016, 03:59:24 PM »

Put the extensions on today look and work Great !!!! Nice Product.

Dante

Harley Guy · « **Reply #14 on:** November 04, 2016, 06:10:11 PM »

Quote from: D-N-D on November 04, 2016, 03:59:24 PM

Put the extensions on today look and work Great !!!! Nice Product.

Dante

Good for you...
.
RIDE ON.......

heatseeker · « **Reply #15 on:** November 14, 2016, 09:48:32 PM »

I received and installed the floorboard extensions from VtwinGoodies and I haven't figured out why it has took me so long to get them. It is so much more comfortable now.

ds33gt · « **Reply #16 on:** November 14, 2016, 09:57:30 PM »

Quote from: heatseeker on November 14, 2016, 09:48:32 PM

I received and installed the floorboard extensions from VtwinGoodies and I haven't figured out why it has took me so long to get them. It is so much more comfortable now.

Just put mine on as well, much more of a useable area now and is much easier to clean with the extra space. Great improvement for $60!

us1fountain · « **Reply #17 on:** November 16, 2016, 07:20:03 PM »

Liking them so far! Wouldn't have minded if they would have moved the floorboards forward an inch too.

Grizzly · « **Reply #18 on:** December 29, 2016, 10:04:40 AM »

I have had the extensions for years and love them. Only concern is scrapping the boards more often especially with my bike having a front & rear lowering kit. I have to watch cornering sometimes, but the comfort of my feet being firmly on the boards is well worth it.

egultrac · « **Reply #19 on:** December 31, 2016, 06:43:02 PM »

Just got a set of extensions for rider and passenger for my 17 CVO Limited from Tom at VTwinGoodies. Have had these on three previous CVOs. Hard to ride without them. Great product, great service!

By the way, put about 2000 km on my new 114 Milwaukee Eight CVO until it was parked for the winter. Handling, stock power much better than any previous CVO including my last 2015 CVO Road Glide Ultra. The shark-nose was great, but still prefer the batwing. Very quiet 114 motor and very quiet drivetrain. Almost un-Harley like.

VANAMAL · « **Reply #20 on:** January 23, 2017, 05:10:44 PM »

The problem is that when you go into a corner and drag youll wreck. The stock floorboard is hinged so it can drag a little and fold up. With the extensions youll drag the support arm and wish you hadnt put them on. Several of us know from that lesson!

Rooster · « **Reply #21 on:** January 23, 2017, 05:36:46 PM »

Just push the bike to the right and hang to the left.

That is if you're really comin into the corners hot. Just don't do that with the wife on the back.

fastfreddy · « **Reply #22 on:** January 23, 2017, 05:44:28 PM »

got the floor board x tenders on the 16...but found out the pipes will drag before the boards do...and the wife was on the back

Yellow09SERG · « **Reply #23 on:** January 23, 2017, 07:56:08 PM »

The extra room is sure nice

ultrafxr · « **Reply #24 on:** January 23, 2017, 10:36:20 PM »

Quote from: Rooster on January 23, 2017, 05:36:46 PM

Just push the bike to the right and hang to the left. That is if you're really comin into the corners hot. Just don't do that with the wife on the back.

Ummm, If you check videos of racers you'll see that they hang in the direction of the turn - not the opposite. Hanging into the turn moves the center of gravity and the motorcycle does not have to lean as much to navigate the turn. Hanging opposite the turn requires more lean for the motorcycle to navigate the turn. The best course of action for 'normal' rider is to just stay upright and in line with the motorcycle.

CVO114 · « **Reply #25 on:** February 14, 2017, 07:52:35 AM »

Kinda a odd question but are these spacers the same for left and right? I installed a vance & hines header on my 2017 and it came with an inch spacer for the right side only "to clear the exhaust". I havery the foot falling off feel and don't want to have to buy both sides if I don't have to, to space out the left side and v&h said they could sell me just the right side pieces again

us1fountain · « **Reply #26 on:** February 15, 2017, 11:11:18 PM »

They are different

CVO114 · « **Reply #27 on:** February 16, 2017, 12:09:13 AM »

Thank u for the response! I got to looking online and ordered a full set. you would think for the money and knowing the people they are selling to, they would include both sides and make it your choice to do one side or both.

MontSE103 · « **Reply #28 on:** January 28, 2018, 11:03:12 PM »

I am looking to move my floorboards forward and up at the toe and down at the heel, is there any such kit or maker out there that someone can recommend?

Author Topic: Floorboard relocate (Read 7762 times)