Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Jerzee customs oil pressure gaure kits  (Read 2213 times)

0 Members and 1 Guest are viewing this topic.

CHH_Badkarma

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 307
  • www.CVOHARLEY.com
    • CA


    • CVO1: 2014 CVO Breakout.
Jerzee customs oil pressure gaure kits
« on: October 01, 2017, 12:44:46 AM »

Anyone have any experience with them? Thinking of picking up their premium kit.
http://www.jerzeecustoms.com/HDOilTrimKitTCP.htm

Logged

CHH_Badkarma

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 307
  • www.CVOHARLEY.com
    • CA


    • CVO1: 2014 CVO Breakout.
Re: Jerzee customs oil pressure gaure kits
« Reply #1 on: October 03, 2017, 02:41:11 AM »

Anyone have any experience with them? Thinking of picking up their premium kit.
http://www.jerzeecustoms.com/HDOilTrimKitTCP.htm


Well, after seeing positive posts on other forums I went ahead and ordered the gauge. Once if arrives and gets thrown on I will try and post up several pictures and try to do a brief overview for everyone  :thumbsup:
Logged

Cat Eye

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1389


    • CVO1: 2015 FLHXSE
Re: Jerzee customs oil pressure gaure kits
« Reply #2 on: October 03, 2017, 02:56:33 AM »

Good luck and looking forward to the pictures

cat
Logged

CVODON

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2420
    • FL

    • CVO1: 15 FLTRUSE
Re: Jerzee customs oil pressure gaure kits
« Reply #3 on: October 03, 2017, 09:05:04 AM »

Drag Specialities has had a similar kit to this for at least 20 years. No reason why it won't work. Not related to this link but for those of you that are not familiar with Drag there Big Book is available on line to browse or I am sure your dealer will let you look at his copy and they are at all the major events for questions and catalogs. Usually there stuff can be bought from 20% off dealers to save a few bucks. They have almost every aftermarket Harley part listed.
Logged

J.D.

  • Guest
Re: Jerzee customs oil pressure gaure kits
« Reply #4 on: October 03, 2017, 09:12:28 AM »

I use one of their kits (the one with the steel bracket, not billet aluminum) and have no complaints.  Vendor told me that you usually have to raise up the tank a bit to install the billet bracket but usually not required for the thinner steel.  Only suggestion is to use a very good thread sealant (not Teflon tape) on the NPT fitting that goes into the case, and don't over tighten it.
Logged

CHH_Badkarma

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 307
  • www.CVOHARLEY.com
    • CA


    • CVO1: 2014 CVO Breakout.
Re: Jerzee customs oil pressure gaure kits
« Reply #5 on: January 14, 2018, 03:17:09 AM »

Finally got it on and took some pictures to post up. I'm happy with how it turned out  :orange:






« Last Edit: January 16, 2018, 02:16:29 AM by CHH_Badkarma »
Logged
 

Page created in 0.124 seconds with 21 queries.