Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[D-N-D]

Very Nice Setup !!!

[hdguy1]

This is my CVO limited with a mustang seat. I did install the hidden antenna, I don't use the CB.

That looka awesome !Where did you end up putting all the wires ?

Thanks

[Goldrush]

Sorry to bring back a dead thread but I was wondering if anyone had the part number for the street glide tag bracket they used for their 2015.

My dealer isn't sure if the Chrome hd curved bracket for the street glide (part #67900008) will work because the light bar is different.
The street glide light bar is straight, ours curves under the brake light.
Thanks

[AG]

I found that the light bracket that came on my 2014 CVO Limited was the same light bar that was used on the 2005 CVO Electraglide. I bought the tag light # 69353-05 to fit the light bar. I used a kuryakyn curved tag bracket, but i had to put a knotch in the center of the mounting area for the wires and elongate the mounting holes ,so Im not sure which Harley bracket fits. Bracket # HD 67900008 or 67900056 looks like they would fit since they have the knotch that I had to put in mine. The later is for earlier bikes. I would see if your dealer has the light bar for your bike and see which tag bracket matches the mounting holes and has the knotch.

[Goldrush]

Update:
The tag bracket part number 67900008 does not fit. The bolt holes don't line up.
Don't want to drill the fender so I need to find an alternative tag mount.

[AG]

The tag bracket mounts only to 2 threaded bolt holes that are in the back of the light bar which are not the same bolts  that go through the fender that hold the light bar to the fender. You have to remove the light bar then bolt the tag bracket to the light bar then bolt the tab bracket back to the fender. I had to slightly elongate the holes in the tag bracket to fit the holes in the light bar.There is also a couple of small threaded mount holes in the light bar that allows you to mount the light that will illuminate your tag.

[AG]

I attached a picture of the light bar from the service manual that shows how the tag bracket is mounted to the light bar

[Goldrush]

Thanks AG.
I did some research after I posted that and found out you are correct.
I actually have it installed now and will be ordering the light for it as well.
That looks way better than the tag on top of the light.
I was thinking about putting a piece of electrical tape inside the light lens to close off the top tag light or what is everyone else doing about that light?

[jmanderson6]

i have a 2016 roadglide ultra cvo and was wondering if i can swap out the lights from a street glide? not really wanting to put my turn signals on my saddlebags and prefer the street glide taillights over the roaddglide anyways. i haven't found a post about anyone doing this. any input would be appreciated

[AG]

I just let mine shine upward. Maybe making me more visible.

[AG]

On the 16 CVO Road Glide, it looks like they used a different fender that doesn't have the dimples and holes to mount the street glide light bar. If you remove the Tail light there will be holes that you wont be able to cover. You could possibly put turn signals in the filler panels between the fender and bags.Kuryakyn has lights that fit the cutouts in the panels for the non CVO bike.   

[King Glide]

I unscrewed the tail light guts from the outer lens and slid a piece of tin foil over the LED.

[jmanderson6]

On the 16 CVO Road Glide, it looks like they used a different fender that doesn't have the dimples and holes to mount the street glide light bar. If you remove the Tail light there will be holes that you wont be able to cover. You could possibly put turn signals in the filler panels between the fender and bags.Kuryakyn has lights that fit the cutouts in the panels for the non CVO bike.

Thanks AG for the info and tip on the filler lights I'm going to look into that.

[cambo]

Thanks AG for the info and tip on the filler lights I'm going to look into that.

Filler lights from Custom Dynamics:


Cam

[Goldrush]

Kuryakyn filler lights on my 14 limited
They weren't very bright but they worked.