Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Idle  (Read 847 times)

0 Members and 1 Guest are viewing this topic.

nyjets1971

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • www.CVOHARLEY.com
    • SC

Idle
« on: October 12, 2019, 09:07:44 PM »

My 2004 electra glide wont idle, seems to run fine but I have to throttle it at stops. I have sprayed the carb and iac valve, but no luck. Can anyone help me out?
Logged

symfrog

  • Newbie
  • *
  • Offline Offline
  • Posts: 39
Re: Idle
« Reply #1 on: October 13, 2019, 12:19:39 AM »

My 2004 electra glide wont idle, seems to run fine but I have to throttle it at stops. I have sprayed the carb and iac valve, but no luck. Can anyone help me out?
Have you used carb cleaner to check for vacuum leaks? All you have to do is start the bike and spray the carb cleaner around the carb and intake manifold, if the rpm increases, you have a vacuum leak. If that doesn't work, try a can of seafoam in the gas tank, it could be plugged from bad gas.

Sent from my SM-G970U using Tapatalk

Logged

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: Idle
« Reply #2 on: October 13, 2019, 09:42:11 AM »


The suggestion from symfrog to check for intake air leaks is on point, leaks were fairly common on the older Twin Cams especially at the manifold to head connections.  Other possibilities include leaking injectors, a TPS (throttle position sensor) reading error, or of course the IAC (idle air control) or it's wiring. 

First check for diagnostic trouble codes.  There are instructions posted on this site if you are not already familiar with how to check for codes.  Checking for intake air leaks and leaking injectors are simple processes that require no special tools, testing the electrical items may require special tools.

To check for leaking fuel injectors, start by removing the air cleaner and blocking the throttle plate wide open.  Then turn the ignition switch on for two seconds, then off for two seconds, and repeat that process about five times.  Visually inspect with a small flashlight for the presence of raw fuel in the throttle body and manifold bores, there should be none.

Jerry

Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.
 

Page created in 0.126 seconds with 25 queries.