www.CVOHARLEY.com
CVO Technical => Milwaukee-Eight => Topic started by: goop on September 28, 2018, 07:29:09 PM
-
i pretty sure i know the answer but better safe than sorry. 19 cvo roadglide i just recieved my fuel moto cam upgrade kit. i noticed that there is 2 pushrods that are shorter than the other 2. is this like a twin cam where the longer 2 go into the exhaust side. thanks. i would call fm but they are closed for the weekend and im installing tomorrow
-
Wouldn't the short ones and long ones match up in length with the ones you take out?
-
The intake pushrods are 10.301" long, the exhaust are 10.531" long.
Jerry
-
Wouldn't the short ones and long ones match up in length with the ones you take out?
u cut the old ones and no they would not as the adjustable bodies have different length not overall
-
i pretty sure i know the answer but better safe than sorry. 19 cvo roadglide i just recieved my fuel moto cam upgrade kit. i noticed that there is 2 pushrods that are shorter than the other 2. is this like a twin cam where the longer 2 go into the exhaust side. thanks. i would call fm but they are closed for the weekend and im installing tomorrow
i am asking about the fuelmoto pushrods not the stock hd ones. the bodies of the fuel moto adjustable ones are different length
-
The longer rods, no matter what brand, go on the exhaust side. As noted in my previous post using the stock rod lengths, the exhaust side should be approximately 0.23" (quarter inch) longer.
Jerry
-
The longer rods, no matter what brand, go on the exhaust side. As noted in my previous post using the stock rod lengths, the exhaust side should be approximately 0.23" (quarter inch) longer.
Jerry
thank you. thats what i thought but couldn't find the answer anywhere. espacially for the m8