www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Handlebar Change SESG  (Read 812 times)

0 Members and 1 Guest are viewing this topic.

mark

  • Guest
Handlebar Change SESG
« on: March 23, 2015, 10:08:10 AM »
Started having shoulder issues and want to replace the stock bars on my 2010 SESG to Chubbys WO575 (2" taller, 2" back).  Considering doing this myself & researching online, nothing looks complicated, just time consuming.  Anyone that's done a handlebar swap chime in with some hints.  Also, I'm getting conflicting info on whether these bars require longer clutch and front brake lines (both are hydraulic).  Chubbys tech help said stock lines will work, but some online posts state otherwise.
Logged

D-N-D

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6785
  • FLHRSEI.ORG
    • PA


    • CVO1: 2020 FLHTKSE Limited / Moonlight Blue & Deep Sea Blue
Re: Handlebar Change SESG
« Reply #1 on: March 23, 2015, 12:55:11 PM »
No need to change the cables the stock one's will work with no problems, use lots of lubrication when pulling the wires though the bars. Not a Fun job @ all !!!! Good Luck !!!
Logged
DND

smiley1049

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 401
Re: Handlebar Change SESG
« Reply #2 on: March 23, 2015, 12:56:51 PM »
Put those bars on my 11 no problems with lines or wires just take your time and color chart all your connectors.
Logged

mark

  • Guest
Re: Handlebar Change SESG
« Reply #3 on: March 23, 2015, 01:56:58 PM »
Smiley, PM sent.
Logged
 

Page created in 0.216 seconds with 21 queries.