Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[johnmowcop]

In advance of my putting back together the rebored barrels, pistons and heads on the CVO 110. When I get them back, hopefully before Christmas, but not holding my breath.

Besides dry fitting (lightly oiled) the o rings and gaskets do I need to apply any sealant anywhere. Did I read someone used a cement as well as the o rings at the cylinder base.

If so what do I use and where.

Thanks as always your advise is appreciated.

JohnT

[hd-dude]

NO sealant on any of the gaskets or orings!

[HILLSIDECYCLE.COM]

Dry gaskets, but a dot of oil on the head bolt threads will aid in the correct torque.
Scott

[prodrag1320]

I actully like anti seeze on headbolts.but what ever you use remember to put on thread & underside of head of the bolt too

[johnmowcop]

Thanks for the advise Gents.