Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Hog103cvo]

2016 Flhtkse, 600 miles covered in first week of ownership. Cut out at junctions 6 times now.
Anybody had the same problem please? Dealership is aware and going to take a look ASAP.
Love the bike though.

[RAINEY]

Any mods?  Tuner?

[hddeuce60]

I had the same problem and it was the EITMS I took it to Harley Davidson and they reprogrammed it and I've had no problem since.

[grc]

It would be best to have a good tech do some real diagnosis versus having us just guess.

It's not uncommon for new bikes from Harley to have driveability problems, including stumble/stall when setting out from a standstill.  It's not right, but it's not uncommon. 

Jerry

[Hog103cvo]

950 miles now. Bike going back to dealership. The MoCo is sending a revised pcm as they are aware of the problem. My dealer has an SG SE with the same problem.
my bike is totally stock.

[Hog103cvo]

Apparently  the factory are aware of a problem and are shipping a new PCM.  No software uploads available yet.

[MrSurly]

<snip>my bike is totally stock.

Wait a minute.... is that even possible? No mufflers? No..... anything?

[Hog103cvo]

I do about 1000 miles a month, gave up on loud pipes on tourers. It's  a must on the 'Bar Hoppers' though😊

[Hog103cvo]

Just as an update. My dealer has advised the pcm replacement has cured the stalling on my 16 Ltd.
This is the second bike they've had reported   with this problem. The other being a 16 Flhxse.

[turn_key]

My friend and I bought our cvo's at the same time and both decel pop like crazy, although his is a little worse. In my experience its not uncommon for the bikes to run like crap out of the box. I was lucky with my last ultra, ran smooth as silk once I put in the fuelmoto intake. We're saving headers and a tune for the winter storage project. justmy2cents...