www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All

Author Topic: Dyno Results  (Read 4442 times)

0 Members and 1 Guest are viewing this topic.

Royalroadie

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 499
  • www.CVOHARLEY.com
    • KS

Re: Dyno Results
« Reply #15 on: July 11, 2016, 10:53:11 PM »
I have the same set up on a 2012 your #s are just about the same.
« Last Edit: July 11, 2016, 10:55:40 PM by Royalroadie »
Logged
V&H Power Dual Header
Rinehart 4"

GMR-PERFORMANCE

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1769
    • TX

Re: Dyno Results
« Reply #16 on: July 19, 2016, 01:30:02 PM »
that curve is not that bad , there is some noise though our the entire curve. I can be tire that is chopped a bearing that is not happy on the drum, Some clutch slip down low.. I would ask about it but I would not insist on a re tune  The power numbers are right on par in tw is very good a few above avg.
Logged
2012 SHARK  S&S 124 150/140   www.gmrperformance.com

Asphalt_Cowboy

  • Guest
Re: Dyno Results
« Reply #17 on: July 30, 2016, 09:29:50 PM »
Quote from: GMR-PERFORMANCE on July 19, 2016, 01:30:02 PM
that curve is not that bad , there is some noise though our the entire curve. I can be tire that is chopped a bearing that is not happy on the drum, Some clutch slip down low.. I would ask about it but I would not insist on a re tune  The power numbers are right on par in tw is very good a few above avg.

I did as you suggested, I took it to another dealer. Come to find out, Gail's doesn't even have a Dyno operator. So he thinks they just put a stock tune in it. That being said, the service manager looked at the graph and pretty much said the same thing you did. I asked him to take it out for a spin to see what he thought. He did and then talked with his Dyno operator. The verdict is the bike runs great and they didn't see any reason to pay to have it retuned at this point. He said they could smooth the graph out, but it wouldn't change the way the bike runs. They both suggested I wait for when I decide to throw new cams in it down the road.


Sent from my iPhone using Tapatalk
Logged

Para Bellum

  • Si vis pacem, para bellum.
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1943

    • CVO1: '07 Canyon Copper FXSTSSE, '08 Crystal Copper SEUC
    • CVO2: '11 Slate/Blk SERGU, '18 Twisted Cherry RGU
Re: Dyno Results
« Reply #18 on: July 30, 2016, 10:10:53 PM »
Quote from: Asphalt_Cowboy on July 30, 2016, 09:29:50 PM
Come to find out, Gail's doesn't even have a Dyno operator. So he thinks they just put a stock tune in it.
Well, they (Gail's) must have someone to operate the dyno, but they might not have someone who can build or tweak a fuel map.  Many dealers are like that; they just have someone who can install a generic canned map from MOCO.
Logged
If you want peace, prepare for war.

Asphalt_Cowboy

  • Guest
Re: Dyno Results
« Reply #19 on: July 30, 2016, 10:22:14 PM »
Quote from: Para Bellum on July 30, 2016, 10:10:53 PM
Well, they (Gail's) must have someone to operate the dyno, but they might not have someone who can build or tweak a fuel map.  Many dealers are like that; they just have someone who can install a generic canned map from MOCO.

Thank you.. You said that WAY better than I did.


Sent from my iPad using Tapatalk
Logged
Pages: 1 [2]  All
« previous next »
 

Page created in 0.213 seconds with 21 queries.