Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Texas 103]

Have seen a couple of mentions in different signatures  about adjustable highway peg mounts. Like to get mine out a tad farther to get around the fan and to get the current mount away  from  the paint on the lowers. What's the hot set up? Brand or Part #   Thanks... Greg     

[skratch]

I don't know about the 'hot' item, but sounds like what you're looking for is either the long angled, or short angled highway peg mounts.

I have short legs, so I have them set to where I can rest my heels on the floorboards, and my toes on the highway pegs.  kinda like forward controls....

http://www.harley-davidson.com/store/long-angled-adjustable-highway-peg-mount-kit-pa-07-5082907--1

http://www.harley-davidson.com/store/short-angled-adjustable-highway-peg-mount-kit-pa-07-5083007--1

[dayne66]

The long-angled work great for me.....5'10" & 32'" inseam.....heals on boards or only on pegs...options are nice.

[OBB]

6'0 with a 34" inseam here. Using the short angled ones.

[Texas 103]

6'0 with a 34" inseam here. Using the short angled ones.

I'm 6-3 34" inseam, thinking I'll go the short angled  ones 

[OBB]

Here's a close up pix. I was wanting to get my shins out of the exhaust ports also.

[Texas 103]

Here's a close up pix. I was wanting to get my shins out of the exhaust ports also.

Thanks! That looks good..  Yep that will work, That an  ez brake you have on there too? 

[OBB]

Thanks! That looks good..  Yep that will work, That an  ez brake you have on there too?

Yes sir. Love it.

[airborne350g]

Yes sir. Love it.

I also use the short angled mounts and they work great. I did forget to install the set screws to adjust the angle of the footpeg but once I did they are perfect.

OBB, is that the 1" version? Also do you have the shifter as well? If so how's that side?

[OBB]

I also use the short angled mounts and they work great. I did forget to install the set screws to adjust the angle of the footpeg but once I did they are perfect.

OBB, is that the 1" version? Also do you have the shifter as well? If so how's that side?

I honestly can't remember right now. I'll look it up and then edit this post. I did not do the shifters from EZ. Stock ones are fine for me.