Topic: Was going to try the Baker Compensator! (Read 1415 times)

catahoula58 · « **on:** October 14, 2016, 02:18:14 PM »

After speaking with Mark over at Baker today. He told me that the Baker Compensator was only good for builds up to 130 torque. So for those that have the Baker Compensater installed, what kind of hp and tq are you running? I have 128.26 hp and 133.75 tq. Mark told me I could try to run this but they would not warranty it if anything happens! He told me to use a 34 tooth solid sprocket in lieu of the baker compensator. I see where a few fellow CVO's are using it on here and have limited miles (5000) with no issues, and a few that have had it installed and have had issues! Any thoughts?

donvito · « **Reply #1 on:** October 17, 2016, 07:38:48 PM »

Subbed for Compensator info.

Rooster · « **Reply #2 on:** October 18, 2016, 02:33:10 PM »

I had the Evo Industries comp assembly had to immediately take it back out. It was just a gear no comp. Put the HD unit back in problem resolved.

Author Topic: Was going to try the Baker Compensator! (Read 1415 times)

catahoula58

Was going to try the Baker Compensator!

donvito

Re: Was going to try the Baker Compensator!

Rooster

Re: Was going to try the Baker Compensator!