Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Durwood]

This build was done at a dealer with the 259e cams, the customer brought it in wanting more left side torque so we went the the Cycle-Rama 575's to accentuate the wanted low end grunt. The compression was right at 10:1.

I have to say this is a neck snapping ride for sure.

[Unbalanced]

Nice sheet Durwood plenty of power from the jump.

Long as the lifters and crank hold up he should have a lot of fun with that.

[CVO 2015]

Got to love 110 ft lbs of torque @2000 rpms...Nice flat  torque curve...Seems comparable to the TTS 150 (2k-3k rpm) in a SE 117...

Sent from my SM-N920V using Tapatalk

[Durwood]

Nice sheet Durwood plenty of power from the jump.

Long as the lifters and crank hold up he should have a lot of fun with that.

Thanks Harry, I put a new set of S&S lifters in it along with the cams and inner bearings. The crank? Well, that is what it is.

Daren

[Durwood]

Got to love 110 ft lbs of torque @2000 rpms...Nice flat  torque curve..

Sent from my SM-N920V using Tapatalk

Thanks, and yes this bike feels awesome from the first hit of the throttle.

[Yellow09SERG]

Very nice build. Torque where you need it