Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Cat Eye]

Stock or aftermarket headpipe?

Full Sac DX header

[Cvostu]

Get a good header pipe and use the stock cvo mufflers. . I love my set up. . My stereo sounds great at any speed and it runs good and strong. . Stuart

[Mr. Warlock]

Thanks for all the replies guys, those were the replies I was looking for.
I already have the DX pipe as well as a D&D Boarzilla. I am rounding up the last few parts I need for my build and am going to tune it with both the Zilla and the Fullsac pipe. I am just trying to decide on using the 2.0 or 1.75 baffles for the Fullsac setup.

Thanks again!

[iski]

Get a good header pipe and use the stock cvo mufflers. . I love my set up. . My stereo sounds great at any speed and it runs good and strong. . Stuart

That setup is what I have been considering.  Losing the cat & keeping the sound at deafcon 5.

[Texas 103]

For those who have tried both.....

What is the difference in noise levels from the 2.0 Baffles to the 1.75 Baffles?
I have had the 2.0 and contemplating the 1.75.

Thanks!!

All my stock 110"s liked the 1.75 Baffle, little quieter, You pick it up on the bottom end where you can use it. 255's cams are a turd after 4 K  nothing to be gained farther to the right   

[TN]

All my stock 110"s liked the 1.75 Baffle, little quieter, You pick it up on the bottom end where you can use it. 255's cams are a turd after 4 K  nothing to be gained farther to the right

I hear many riders say this and I may agree after 4k in 5th or 6th gear it gains slowly, but yer speedo will be in triple digits. 1st thru 3rd is not too bad and 4th will climb pretty good after 4k it does with mine anyhow. I guess that's cause I got the fastest color.  I'm referring to real world riding, I have limited knowledge of dynos.

TN

I run 1.75 fullsac baffles ATM.