Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[motorcmdr]

I just purchased a 2015 FLTRUSE, and found that the siren will not chirp when the ignition is cycled on or off with the run switch. I also tried just the alarm by having the fob away from the garage, and had the lights flash when moved or attempting to start, but no siren activation. Any help would be appreciated.

Thanks.

[KGB]

Here you go:

Siren Chirp Mode (Confirmation)
Chirp Mode
Vehicles with a siren can be set to chirp upon arming and disarming. In chirp mode, the siren
sounds two chirps when arming, and a single chirp when disarming.
Chirpless Mode
In chirpless mode, the siren does not chirp on arming or disarming.
The siren still provides warning chirps and sounds the alarm if the motorcycle is moved without
the fob present.
Switching Modes
Perform the following to switch between chirp and chirpless modes.
1. With security fob present, set the OFF/RUN switch to RUN.
2. When the security lamp turns off, set the OFF/RUN switch to OFF.
3. When the security lamp turns off (but before the turn signals flash twice), immediately set
the OFF/RUN switch to RUN.
4. When the security lamp turns off, immediately set the OFF/RUN switch to OFF.
5. When the security lamp turns off (but before the turn signals flash twice), immediately set
the OFF/RUN switch to RUN. The system changes mode. The siren chirps or remains silent
accordingly.

[ScottAL]

Try this: (from owners manual under siren chirp mode if easier than taking computer to bike)

Perform the following to switch between chirp and chirpless modes.

1.With security fob present, set the OFF/RUN switch to RUN.
2.When the security lamp turns off, set the OFF/RUN switch to OFF.
3.When the security lamp turns off (but before the turn signals flash twice), immediately set the OFF/RUN switch to RUN.
4.When the security lamp turns off, immediately set the OFF/RUN switch to OFF.
5.When the security lamp turns off (but before the turn signals flash twice), immediately set the OFF/RUN switch to RUN. The system changes mode. The siren chirps or remains silent accordingly.

[motorcmdr]

I will try this. Thank you.

[havenolife]

I just purchased a 2015 FLTRUSE, and found that the siren will not chirp when the ignition is cycled on or off with the run switch. I also tried just the alarm by having the fob away from the garage, and had the lights flash when moved or attempting to start, but no siren activation. Any help would be appreciated.

Thanks.

it sounds like ether the siren is missing or the battery is dead in the siren because he said {had the lights flash when moved or attempting to start but no sound } so its not there or not working it should have went off

[grc]

it sounds like ether the siren is missing or the battery is dead in the siren because he said {had the lights flash when moved or attempting to start but no sound } so its not there or not working it should have went off

What he said.^^^       Before going any further, you need to make sure the siren is installed and connected.  Moving the bike while the security system fob was not present should have set off the siren.  Once you have a properly working siren, then you can use the info from the manual to set the chirp mode the way you want it.

Jerry