Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ultrarider123]

I ran Freedom shields with my Street Glides and loved them.  When I moved to the '15 RGU, knowing the Freedom reputation, I went with one.  Thing is, the SERGU faring design was allowing for a bit less wind on me but more side wind on Vickie.  The Freedom did not help alleviate that issue.  After reviewing some posts here and their website, I tried Clearview and was very happy.  The flip out at the top was similar to the Freedom but the small extra on the bottom sides of the Clearview (and a bit of a forward flip on that part, too) really helped with the passenger side wind.  I also installed the Kuryakyn adjustable side protectors...made the biggest difference.
I've posted pictures of the Clearview installed on Beauregard here on the site but can't find them on my laptop.  I rode in this morning and will take a couple to post.

[PFWiz]

I put a Xlarge, smoke tint Clearview with the re-curve on my CVO Limited. The top of the shield is inline with my mustache and the gentle re-curve does not distort my line of sight when I need to crouch down in a rain storm. Or at  least that is the plan. The bike is still sitting at the dealer with 1 mile on the odometer. (living in Northern Ohio sucks.)

For you RG folks I put 37,000 plus miles on my RGU and nothing works as well as a Madstaad. You may not like the way it looks, but if you are a function over form kind of person like me there is only one answer....

[ultrarider123]

Here's a couple pictures of the lightly tinted.  I ordered this March of 2016 so the pictures reflect 2 years of service.  You can see this thing holds up well with little to no distortion.
Here's what I ordered:
Width:
2015 ROAD GLIDE GT SHAPE
Height:
MEDIUM
Color:
LIGHT GRAY
Vent Options:
NO VENTS

[ultrarider123]

...

[ultrarider123]

This one is taken from my eye level.  I'm 5'6"

[DCFIREMANN]

Haird that is a nice fit on your bike.


Be Safe

THE DAWG

[groupw]

..... i just installed a 15" LRS Stingray on the '16 SERGU
...... i'm 6'1, look just over the top of the recurve & when in motion the wind flow is 3- 4" above my helmet & 1 handwidth away on each side.
....... the 'scalloped' sides of the Stingray seem to generate a little more wind noise than stock, but  pretty minor.

[porthole]

I am trying to help 1dcfireman out with his new windshield.

There's two of ya?

[Lil Mel]

Look into F4 Customs for windshields.  They are harder to scratch especially compared to the HD stock shields.  They are American made too! www.f4customs.com

[DCFIREMANN]

I just checked out their website. Nice looking windshields for sure BUT a lot of people are looking for curved windshields to redirect air flow from the rider or passenger.

Be Safe

THE DAWG

[ultrarider123]

I just checked out their website. Nice looking windshields for sure BUT a lot of people are looking for curved windshields to redirect air flow from the rider or passenger.

Be Safe

THE DAWG

I went to the site and that's what I was thinking, too, there Dawg.  It is a nice shield if you are looking for a better option than stock and made in the USA