Topic: How do I clear the garage door opener memory? (Read 806 times)

JoeVibe · « **on:** July 29, 2018, 09:26:46 AM »

I'm selling my Ultra and need to know how to clear the GDO receiver so that the bike I sell can't open my garage door. I unplugged the receiver overnight and it still retained the codes. Does anyone know the secret?

ScottAL · « **Reply #1 on:** July 29, 2018, 09:37:54 AM »

1.
Unplug the receiver from the 110 Volt power outlet.

2.
Wait ten seconds.

3.
Press and hold the program button on the receiver. While holding the button down, plug the receiver into the power outlet. The red LED flashes rapidly.

4.
Release the program button. The receiver is now reset, and all memory is erased.

5.
Program the receiver again. See the Receiver and Transmitter Programming section earlier in these instructions.

JoeVibe · « **Reply #2 on:** July 29, 2018, 09:43:06 AM »

Thanks Scott!

Author Topic: How do I clear the garage door opener memory? (Read 806 times)

JoeVibe

How do I clear the garage door opener memory?

ScottAL

Re: How do I clear the garage door opener memory?

JoeVibe

Re: How do I clear the garage door opener memory?