Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Meestro16cvo]

Hi all, i just rebuilt all 3 calipers on my 2016 CVO Limited. Bled the brakes like normal using a vac bleeder at each caliper and I still have a spongy brake feel. Using DOT 4 Fluid. I even bought the set up from ITM to cycle the ABS motor, still not right. I really feel that air is still in there as if you do a double pump, the lever is hard at about half travel. Anyone run across this? I think I’ve run about 2 quarts of fluid through this system. Anyone have any tricks? I used the cycle pro rebuild kits including pistons from JP cycles. PN 10230876.