Topic: Oil temp sending unit (Read 882 times)

Mike103 · « **on:** October 18, 2007, 04:27:27 PM »

Can anyone tell me how to install the oil temp sending unit for the in-dash gauge, directly on the oil pan in lieu of the Moco way of tying into the oil cooler line? I think a hardware store plumbing fitting or two is needed. Any pics and other specific info is greatly appreciated.

Coyote. · « **Reply #1 on:** October 18, 2007, 07:30:29 PM »

Just get a brass bushing (3/8" to 1/4" reducer bushing) and install it in place of the horizontal plug in the pan. That's it.

Mike103 · « **Reply #2 on:** October 18, 2007, 08:18:33 PM »

Thanks. That's the plug facing front next to the drain plug? Any tricks on securing the wire?Sorry if this seems like a dumb question. My dealer is not helping much on this and I have to do it myself.

mr_magoo · « **Reply #3 on:** October 18, 2007, 08:24:27 PM »

http://www.cvoharley.com/smf/index.php?topic=6385.0

Try this twolane explains it well.

Mike103 · « **Reply #4 on:** October 18, 2007, 09:49:07 PM »

Thanks. I'd like to see an install if anyone has a pic.

Author Topic: Oil temp sending unit (Read 882 times)

Mike103

Oil temp sending unit

Coyote.

Re: Oil temp sending unit

Mike103

Re: Oil temp sending unit

mr_magoo

Re: Oil temp sending unit

Mike103

Re: Oil temp sending unit